Entering titles, Clearing titles, AUX function

Operations Common to Each Mode

English

●Cellular phone interrupt setting

If you connect this unit and your cellular phone with a separately sold cable, you can listen to your telephone calls on your car speakers.

∗The factory default setting is “OFF”.

2-1. Select “INT-SW”.

3-1. Press the [w] or [z] button to select the setting. Each time you press the [w] or [z] button, the setting changes in the following order:

“OFF” ↔ “ON” ↔ “MUTE”

• OFF:

This unit continues normal operation even when the cellular phone is used.

• ON:

You can listen to your telephone calls from the speakers connected to this unit.

∗When listening to your calls on your car speakers, you can adjust the volume by turning the [ROTARY] knob.

• MUTE:

The sound from this unit is muted during telephone calls.

Note:

•If connecting a hands-free kit, please ensure the setting is ON to receive the telephone audio through the system. (the sound output from the AUX.)

●Selecting Rear or Subwoofer

The factory default setting is “REAR”.

2-1. Select “REAR/S-W”.

3-1. Press the [w] or [z] button to select “REAR” or “S-WOOFER”.

●Performing a system check

This function allows you to perform a system check from the adjust mode when required.

2-1. Select “SYSTEM CHECK”.

3-1. Press and hold the [ ] button (1 sec.).

“SYSTEM CHECK” appears in the display, then the unit returns to the previous operation mode.

Entering titles

Titles up to 10 characters long can be stored in memory and displayed for CD. There 50 titles that can be entered.

1.Press the [SRC] button to select the mode you want to enter a title (CD).

2.Select and play a CD for which you want to enter the title.

3.Press and hold the [DISP] button (1 sec.).

4.Press the [x] or [v] button to select “TITLE INPUT”.

5.Press the [ ] button.

The display switches to the title input display.

6.Press the [x] or [v] button to move the cursor.

7.Press the [BND] button to select a character type. Each time you press the [BND] button, the character type changes in the following order:

Capital letters ➜ Numbers ➜ Symbols ➜ Umlaut ➜ Capital letters…

8.Press the [w] or [z] button to select the desired character.

9.Repeat steps 6 to 8 to enter up to 10 characters for the title.

10.Press and hold the [ ] button (2 sec.) to store the title into memory.

Clearing titles

1.Select and play a CD in the CD changer for which you want to clear the title.

2.Press and hold the [DISP] button (1 sec.).

3.Press the [x] or [v] button to select “TITLE INPUT”.

4.Press the [ ] button.

The display switches to the title input display.

5.Press and hold the [BND] button (1 sec.). All characters in the title disappear.

6.Press and hold the [ ] button for (2 sec.) to store the setting.

AUX function

This system has an external input jack on the front panel so you can listen to sounds and music from external devices connected to this unit.

●Selecting AUX IN sensitivity

Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume.

∗The factory default setting is “MID”.

1.Press and hold the [DISP] button (1 sec.).

2.Select “AUX SENS”.

3.Press the [w] or [z] button to select “HIGH”, “MID” or “LOW”.