Clarion CX609E Radio Data System Operations, Selecting PTY, Auto store function for TP stations

Radio Data System Operations

∗ If “TP” is not lit, pressing the [TA] button searches			Selecting PTY
for a TP station.			1. Press and hold the [DISP] button (1 sec.) to
● Searching for a TP station
				switch to the “Radio Data System”
When “TP” is not lit, if you press the [TA] button,
				adjustment selection display.
“TA” in the display lights and the unit
			2.	Press the [x] or [v] button to select
automatically receives a TP station.				“PTY SELECT”.
Auto store function for TP stations			3.	Press the [	] button.
			4. Press any one of the [DIRECT] buttons.
You can automatically store up to 6 TP stations				Alternatively, press the [w] or [z] button to
into preset memory. If the number of TP can be				select the desired PTY.
received less than 6, broadcast stations already
			5. Press the [DISP] button to return to the
stored in memory and left without being
				previous mode.
overwritten.
				∗ Below are the factory default settings stored
As “TA” lit in the display, press and hold the
				for the [DIRECT] buttons.
[		] button (2 sec.). The TP stations with the
				∗ The PTY select mode is cancelled
good reception sensitivity are stored into preset
				automatically 7 seconds after a PTY is
memory.
				selected.
∗ Even if you select FM1 or FM2, a TP station is
stored into memory for FM3.			PTY seek
PTY (Programme Type)			1. Press and hold the [DISP] button (1 sec.) to
				switch to the “Radio Data System”
This function enables you to listen to a
				adjustment selection display.
broadcast of the selected programme type even			2.	Press the [x] or [v] button to select
if the unit is on a function mode other than radio.				“PTY SELECT”.
∗ Some countries do not yet have PTY broadcast.
			3.	Press the [	] button.
∗ In the TA standby mode, a TP station has priority
			4. Press the [v] button to search for a PTY
over a PTY broadcast station.
				broadcast in the direction of higher
∗ The factory default setting is “OFF”.
				frequencies; press the [x] button to search
1. Press and hold the [DISP] button (1 sec.) to
				in the direction of lower frequencies.
	switch to the “Radio Data System”
				∗ If no station with the selected PTY broadcast
	adjustment selection display.
				can be received, the unit returns to the PTY
2.	Press the [x] or [v] button to select
				select mode.
	“PTY”.
3.	Press the [w] or [z] button to select “ON”		PTY preset memory
	or “OFF”.
			1. Press and hold the [DISP] button (1 sec.) to
	• ON:
				switch to the “Radio Data System”
	“PTY” in the display lights and PTY standby
				adjustment selection display.
	mode is turned on. When the selected PTY
			2.	Press the [x] or [v] button to select
	broadcast starts, the PTY item name
				“PTY SELECT”.
	appears in the display.
			3.	Press the [	] button.
	• OFF:
			4. Press the [w] or [z] button to select the

“PTY” in the display goes off and PTY	desired PTY.
standby mode is cancelled.
	The 29 types of PTY below can be selected.
4. Press the [DISP] button to return to the
	5. If you press and hold any one of the
previous mode.
	[DIRECT] buttons (2 sec.), the selected PTY
● Cancelling a PTY interrupt broadcast
	is stored into that preset channel memory.
Press the [TA] button during the PTY interrupt
broadcast, the PTY interrupt is cancelled and
the unit returns to PTY standby mode.

English

CX609E 13