Clarion CZ109 owner manual Radio Operations

English

●Adjusting the balance

2-1. Select “BALANCE”.

3-1. Turn the [ROTARY] knob to adjust balance between right and left speakers.

∗The factory default setting is “CENTER”. (Adjustment range: RIGHT12 to LEFT12)

●Adjusting the fader

2-1. Select “FADER”.

3-1. Turn the [ROTARY] knob to adjust balance between front and rear speakers.

∗The factory default setting is “CENTER”. (Adjustment range: FRONT12 to REAR12)

●Adjusting the non-fader volume

Adjust volume output from the unit’s non-fader output terminal.

2-1. Select “NF VOL”.

3-1. Turn the [ROTARY] knob clockwise to increase volume; turn counterclockwise to decrease volume.

∗The factory default setting is “0”. (Adjustment range: +6 to –6)

Note:

•When in the sound adjustment mode, if no operation is performed for 10 seconds or more, the mode is cancelled and the unit returns to the previous mode.

Setting the MAGNA BASS EXTEND

The MAGNA BASS EXTEND function does not adjust low frequencies like normal sound adjustments, but emphasizes the deep bass range with dynamic sound.

∗The factory default setting is “OFF”.

1.Press and hold the [SOUND] button (1 sec.) to enable MAGNA BASS EXTEND.

2.Press and hold the [SOUND] button (1 sec.) to disable MAGNA BASS EXTEND.

Radio Operations

Listening to broadcasts

1.Press the [SRC] button and select radio mode.

2.Press the [BND] button and select the reception band. Each time the button is pressed, the band changes as follows:

F1 (FM1) ➜ F2 (FM2) ➜ F3 (FM3) ➜ AM ➜ F1 (FM1)...

Tuning

3 tuning modes are available: seek tuning, manual tuning and preset tuning.

Seek tuning

1.Press the [BND] button and select the desired band (FM/AM).

∗If “MANU” appears in the display, press and hold the [BND] button (1 sec.). “MANU” will turn off, and seek tuning will be enabled.

2.Press [x] or [v] to automatically seek a station.

Manual tuning

2 modes are available: Quick tuning and step tuning.

●Quick tuning

Press and hold [x] or [v] (1 sec.) to tune a station.

●Step tuning

Press [x] or [v] to manually tune a station.

Recalling a preset station

Atotal of 24 preset positions (6-FM1, 6-FM2, 6- FM3, 6-AM) can be used to store broadcast stations in memory. Press the corresponding [DIRECT] button to automatically recall the stored frequency.

10 CZ109