TV Operations
TV Operations
TV tuner functions
Manual tuning
Auto store | Setting the TV area |
English
When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV requires a TV tuner and monitor.
Watching a TV
1.Press the [Function] button and select the TV mode.
2.Press the [Band] button to select the desired TV band (TV1 or TV2). Each time the button is pressed, the input selection toggles be- tween TV1 and TV2.
3.Press the [A] or [D] button to tune in the desired TV station.
Tuning
There are 3 types of tuning mode available, Seek tuning, manual tuning and preset tuning.
There are 2 ways available: Quick tuning and step tuning.
When you are in the step tuning mode, the fre- quency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency.
1.Press the [Band] button and select the de- sired band (TV1 or TV2).
∗If “MANU” is not lit in the display, press and hold the [Band] button for 1 second or longer. “MANU” lights in the display and manual tun- ing is now available.
2.Tune into a station.
●Quick tuning:
Press and hold the [A] or [D] button for 1 second or longer to tune in a station.
●Step tuning:
Press the [A] or [D] button to manually tune in a station.
Auto store selects 6 TV stations automatically and stores each one into preset memory.
If there are not 6 stations with good reception, stations previously stored in memory remain and only the strong stations are stored into memory.
1.Press the [Band] button and select the de- sired TV band (TV1 or TV2).
2.Press and hold the [Scan] button for 2 sec- onds or longer. The stations with good recep- tion are stored automatically to the preset channels.
Preset scan
Preset scan allows the user to view each preset position before it automatically advances to the next preset. This function is useful for searching for a desired TV station in memory.
1. | Press the [Scan] button. |
2. | When the desired station is found, press the |
When you select the TV area (TV reception area), the TV tuner area setting changes.
1.Press and hold the [Title] button for 1 second or longer to switch to the adjustment selec- tion display.
2.Press the [A] or [D] button to select “TV AREA”.
3.Press the [s] button.
4.Turning the [Rotary] knob clockwise or coun- terclockwise to select the reception area.
5.Press the [s] button.
6.Press the [Title] button to return to the previ- ous mode.
∗The above operations are required when a TV tuner other than TTX7501z is connected.
Watching a video
The TV tuner has a VTR input terminal to which 1 external device can be connected. Connect a
English
Seek tuning
1. | Press the [Band] button and select the de- |
| sired TV band (TV1 or TV2). |
| ∗ If “MANU” is lit in the display, press and hold |
| the [Band] button for 1 second or longer. |
| “MANU” in the display goes off and seek tun- |
| ing is now available. |
2. | Press the [A] or [D] button to automati- |
| cally seek a station. Press the [D] button to |
Preset tuning
A total of 12 TV stations can be stored
1. | Press the [Band] button and select the de- |
| sired TV band (TV1 or TV2). |
2. | Turning the [Preset] knob to select a TV sta- |
[Scan] button again to remain tuned to that |
station. |
Note:
•Do not press and hold the [Scan] button for 2 seconds or longer. Doing so will trigger the auto store function and start storing stations into memory.
12 V video cassette player (VCP) or video cas- sette recorder (VCR) to the TV tuner input termi- nal.
1.Press the [Random] button to select VTR.
2.To return to the TV broadcast, press the [Random] button.
automatically tune up the frequency band to |
the next available TV station; press the [A] |
button to automatically tune down. |
tion to start with. |
Manual memory
1.Press the [Band] button and select the de- sired TV band (TV1 or TV2).
2.Press [A] or [D] button to select a station to be put into memory. Then, press the [Memory] button.
3.Turning the [Preset] a preset memory num- ber to be registered.
4.Press and hold the [Memory] button (for about 2 seconds).
∗After a registration is completed, “CH” indica- tion becomes lit in the display from the blink- ing status.
Setting the TV diver
You can change the reception setting for the TV antenna connected to the TV tuner.
1.Press and hold the [Title] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [A] or [D] button to select “TV DIVER”.
3.Turning the [Rotary] knob clockwise to “ON” or counterclockwise to “OFF”.
●ON:
Sets the diver setting to ON.
●OFF:
Sets the diver setting to OFF.
4.Press the [Title] button to return to the previ- ous mode.
24 DMZ637MP | DMZ637MP 25 |
