How to make wirings
3. Digital Optical Fiber Cable
When you connect the digital optical fiber cable to the digital input terminal or to the digi- tal output terminal, firmly insert it until it is locked in position.
Connect the black slid cap side to the digital input terminal of the DPH 910.
Note:
Do not bend the digital optical fiber cable through a loop smaller than 1˝ (3cm) in radius. Doing so will greatly reduce perfomance.
To remove the digital optical fiber cable, pull it by lightly grasping the slide cap C of the cable in your fingers.
C
9
Digital optical fiber cable (Black slide cap side)
After connecting, fasten the cable using the included cable clip 9. One cable clip can fix up to 2 digital optical fiber cables.
4. Ground lead
Tighten the small terminal of the ground lead
Etogether with the mounting bracket 5, and connect the large terminal to the metal part of the car body using the car screw D.
If grounding is not achieved, noise results.
E
5
D
8
12 DPH910
