Clarion APX4361, DPX11551 Four speakers in stereo full range, Four speakers in stereo filtered

APX_DPX Amps.qxd 2/6/2008 11:53 AM Page 17

Four-channel high-power system (APX4361)

In this application, the APX4361 is used as a four-channel amplifier to drive four speakers in stereo with fader control.

	English
Front Left	Rear Right
Full range	Full range

Front Right	Rear Left
Full range	Full range

Four speakers in stereo - full range

• Set crossover mode switch to OFF

Four speakers in stereo - filtered

If the front or rear speakers are smaller than 5.25”, you may decide to enable the crossover. The following apply to the front or rear channels with the small speakers.

• Set crossover mode switch to HP

• Set crossover frequency to ~200Hz for 4-inch speakers

~350Hz for 3.5-inch speakers

17