Clarion DSH920S Before Installation, Accessories, Installation And Wire Connection, English

English

5. INSTALLATION AND WIRE CONNECTION

Before Installation

1.Before starting, be sure to disconnect the battery’s negative “–” terminal to prevent ac- cidents due to short-circuits.

2.Location

Consider safety and operability when select- ing a place for installation. Avoid the follow- ing.

•Locations where the unit will hamper driving.

•Locations where the unit could injure passen- gers if the car stops suddenly.

•Locations exposed to direct sunlight or hot air from the heater, etc.

•Locations where the unit may be exposed to rain or water.

3.Be sure to use the included screws and brackets. Screws other than those supplied could damage the unit.

CaseCase

Damage

8mm max.

4.When drilling holes in the dashboard, etc., be sure to check beforehand that there are no harnesses or other wires inside.

Accessories

1Mounting bracket	2 pieces	3Canoe clip	4 pieces
2Mounting screw	4 pieces	4CeNET cable	1 piece

10 DSH920S