English
How to Make Wirings
1. CeNET Cable | 3. CeNET/STAND ALONE switch |
Orient the CeNET cable in the direction | Be sure to check to see if the select switch |
shown in the figure and insert it until it is | located on the back side of the main unit is |
locked in position. To remove the CeNET | set to the “CeNET” position. |
cable, pull it by lightly grasping the slide cap | Also, set it to the “STAND ALONE” position |
A in your fingers. | when the SIRIUS controller (DSC920S), sold |
| separately, is used. |
2. SIRIUS antenna
Connect a SIRIUS antenna (sold separately) to the SIRIUS antenna terminal.
3
4
When removing, extract while keep pressing the portion B.
Note:
•Be sure to turn the main unit power off when the SIRIUS antenna cable is connected.
•Do not give a strong shock to the antenna con- nector.
12 DSH920S
