XP SBC HC
Audio Connections
English
Audio Connections
Option 1 (figure 4)
Connecting the FM transmitter to a line output of an audio source, e.g. REC OUT,
LINE OUT.
1Connect the 3.5mm stereo plug of the stereo audio cable to the FM transmitter’s 3.5mm headphone input.
2Connect the other 3.5mm stereo plug of the audio cable (2 m) to the 3.5 mm stereo plug of the connector cable (20 cm)
3Connect the 2 RCA plugs of the connector cable (20 cm) to a line output (REC OUT or LINE OUT) of an audio source, e.g.TV, HiFi or PC:
–Check if the red RCA plug (right channel) is connected to the right channel (red) of the audio source.
–Check if the white RCA plug (left channel) is connected to the left channel (white) of the audio source.
4Set the transmitter’s input selector switch to 250 mV.
5Switch on your audio source.The red power indication LED of the transmitter lights up if receiving an audio signal.
6In case the line output of the audio source has an adjustable output level, adjust the line output level of the audio source to the highest acceptable undistorted level.
7Switch on the headphone.You may hear a hissing sound through the headphone if the headphone is not yet properly tuned to the transmitter.
8To tune, press and hold the tuning control button for about 1 second. Repeat if necessary.
9Adjust the volume to the desired level with the headphone volume control.
Option 2 (figure 5)
Connecting the FM transmitter to a headphone output of an audio source
1Connect the 3.5mm stereo plug of the stereo audio cable (2 m) to the FM transmitter’s 3.5mm headphone input.
2Connect the other 3.5mm stereo plug of the stereo audio cable (2 m) to the headphone output of an audio source, such as TV, HiFi or PC.
–In case your audio source has a 6.3mm headphone output, use the supplied 3.5mm to 6.3 mm stereo adapter plug.
8
