3Set the transmitter’s input selector switch
to 3 V.
4Switch on your audio source and carefully
increase the volume of the audio source.
The red power indication LED of the
transmitter lights up if receiving an audio
signal.
5Switch on the headphone.You may hear a
hissing sound through the headphone if the
headphone is not yet properly tuned to the
transmitter.
6To tune, press and hold the tuning control
button for about 1 second. Repeat if
necessary.
7Adjust the volume to the desired level with
the headphone volume control.
Basic operation
When the FM transmitter is connected to a:
- line output of an audio source, such as
REC OUT or LINE OUT or
- headphone output of an audio source.
1Switch on your audio source and carefully
increase the volume of the audio source.
The red power indication LED of the
transmitter lights up if receiving an audio
signal.
2If the power indication LED starts blinking:
set the input selector switch to 3 V or
reduce the audio volume of the audio
source.
3Switch on the headphone.You may hear a
hissing sound through the headphone if the
headphone is not yet properly tuned to the
transmitter.
4To tune, press and hold the tuning control
button for about 1 second. Repeat if
necessary.
5Adjust the volume to the desired level with
the headphone volume control.
6Push the SRS™ on/off button to switch the
SRS™ surround sound mode on or off.
Operation
9
English
XP SBC HC 8900/00-1.1 16-08-2001 15:30 Pagina 9