Basic Operations
Adjusting the fader |
|
|
| CT (Clock Time) function | ||||||
1. Press the | The CT function receives CT data sent from an | |||||||||
2. Turning the [ROTARY] knob clockwise em- | RDS station and displays the time. Press the | |||||||||
[DISP] button to switch to the CT display. | ||||||||||
| phasizes the sound from the front speakers; | |||||||||
| ∗ If a CT data is not being received, | |||||||||
| turning it counterclockwise emphasizes the | |||||||||
| sound from the rear speakers. |
|
|
| in the display. | |||||
∗ The factory default setting is “FAD 0”. | Note: | |||||||||
|
|
|
|
|
|
|
|
| CT data is not transmitted in some countries and | |
Setting the |
|
|
| by some broadcast stations. Also, in some areas, | ||||||
|
|
| the CT display may not accurate. | |||||||
This unit is provided with 3 types of sound tone | AUX function | |||||||||
effects stored in memory. Select the one you | ||||||||||
prefer. |
|
|
|
|
|
| This system has an external jack input in the front | |||
∗ The factory default setting is | panel where you can listen to sounds and music | |||||||||
Each time you press the | from external devices connected to this unit. | |||||||||
1. Connect the external music player to the [AUX] | ||||||||||
tone effect changes in the following order: | ||||||||||
input. Display will automatically switch to AUX | ||||||||||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| mode. Alternately, user can press the [SRC] | |
|
|
|
|
|
|
|
|
| ||
button to select the AUX mode. | ||||||||||
Notes: | ||||||||||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| Use only the 3.5mm stereo jack for the AUX jack | |
|
|
| input. | |||||||
: bass emphasized | Volume can be adjusted through the unit. If you | |||||||||
face difficulties of hearing sound even after volume | ||||||||||
: treble emphasized | has been adjusted, please refer section “Selecting | |||||||||
: bass and treble emphasized | AUX IN sensitivity” on page 27 for details. | |||||||||
Remove the audio jack from [AUX] input during | ||||||||||
|
|
| ||||||||
|
|
|
|
|
|
|
|
| AUX mode will revert to Radio mode automati- | |
|
|
|
|
|
|
|
|
| cally. |
Adjusting MAGNA BASS EX
The MAGNA BASS EX does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.
∗The factory default setting is off.
1. Press and hold the
effect. lights in the display.
2. Press and hold the
effect. goes off from the display.
English
DUB278RMP 13