Operations Common to Each Mode

English

OFF:

 

This unit continues normal operation even when

 

the cellular phone is used.

ON:

You can listen to your telephone calls from the speakers connected to this unit.

MUTE:

The sound from this unit is muted during telephone calls.

Notes:

When the “TEL-SW” is set to “ON” or “MUTE” and telephone is connected, system will automatically power ON (Initially power OFF). When telephone is disconnected, system will return to power OFF.

This unit requires hands-free kit that supports [AUX] input as a cellular phone audio input. Please consult your local authorized Clarion dealer for more information on the handsfree kit offered.

If connecting a hands-free kit, please ensure the setting is ON to receive the telephone audio through the system.

When listening to your calls on your car speak- ers, you can adjust the volume by turning the [ROTARY] knob, it will be memorized as new telephone volume.

The factory default setting for this volume is “19”.

This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car.

This function is not compatible with all cellular telephones. Please contact your local authorized Clarion dealer for information on proper installation and compatibility.

Setting the button and screen illumination

Press the [COLOR] button to select a color type. Each time you press the [COLOR] button, the type changes in the following orders:

COLOR-SCAN INDIGO-BLUE SURF-BLUE SILKY-WHITE AQUA-GREEN FRESH-GREEN LEAF-GREEN WARM-AMBER PASSION-RED VIVID-PINK PALE-PINK DARK-VIOLET PURE-PURPLE U-COLOR1

U-COLOR2 U-COLOR3 COLOR-SCAN...

Setting COLOR SCAN mode

As selecting “COLOR-SCAN”, the color automatically changes.

∗The factory default setting is “COLOR-SCAN”.

∗After 3 seconds the color changes to the other.

Setting USER mode

As selecting “U-COLOR 1, 2, 3”, press and hold the [COLOR] button for 1 second or longer to enter the setting.

1.“R8 G8 B8” appears in the display.

∗The factory default setting is “R8 G8 B8” (R: red, G: green, B: blue) for all user colors.

2. Press the [ , ] button to move the cursor for adjusting the R, G or B value. The value of R is blinking by default.

3.Turn the [ROTARY] knob to select from 0 to 8.

4. Press the [ ] button to store the color in memory and cancel setting mode.

Note:

Since “R0 G0 B0” will not display anything, thus all values are prevented from setting to 0 at the same time.

28 DUB278RMP