Operations Common to Each Mode

Adjustment Mode

1.Press the [ADJ] button to switch to the adjust- ment selection display.

2. Press the [

 

 

,

 

] button to select the “Item

 

 

name”.

 

 

 

 

 

“KNOB LED”

 

 

“SCRN SVR”

“A-SCROLL”

“AUX SENS”

“TEL-SP”

“TEL-SW”

3.Turn the [ROTARY] knob to select the “Desired setting value”.

∗After completing settings, press the [ADJ] button to return to the previous mode.

ON:

To scroll automatically.

OFF:

To scroll just 1 time when the title was changed or the [TITLE] button was pressed for 1 second or longer.

Selecting AUX IN sensitivity

Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume.

∗The factory default setting is “MID”.

English

Turning the screen saver function on or off

This unit is provided with the screen saver function which allows you to show various kinds of patterns in a random order in the operation status indication area of the display. You can turn on and off this function.

If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.

∗The factory default setting is “ON”. 2-1. Select “SCRN SVR”.

3-1. Turn the [ROTARY] knob to select “SS ON” or “SS OFF”.

SS ON:

Screen saver is enabled and message knob indication in power saving mode.

SS OFF:

Screen saver is disabled and message knob indication is display all the time.

Setting the method for title scroll

Set how to scroll in MP3/WMA title.

∗The factory default setting is “ON”. 2-1. Select “A-SCROLL”.

3-1. Turn the [ROTARY] knob to select “ON” or “OFF”.

2-1. Select “AUX SENS”.

3-1. Turn the [ROTARY] knob to select “LOW”, “MID” or “HIGH”.

Note:

This adjustment only affects music playing via [AUX] input. Telephone interrupt will be using “MID” as default.

Setting the car speaker output for the cellular phone

∗The factory default setting is “RIGHT”.

∗To output the telephone calls, set the cellular phone interrupt to ON.

2-1. Select “TEL-SP”.

3-1. Turn the [ROTARY] knob to select “RIGHT”, or “LEFT”.

“RIGHT”

Telephone calls can be heard on the front right speaker connected to this unit.

“LEFT”

Telephone calls can be heard on the front left speaker connected to this unit.

Cellular phone interrupt setting

If you connect this unit and your cellular phone with a separately sold unit, you can listen to your telephone calls on your car speakers.

∗The factory default setting is “OFF”.

2-1. Select “TEL-SW”.

3-1. Turn the [ROTARY] knob to select the set- ting.

Each time you turn the [ROTARY] knob, the setting changes in the following order:

OFF ON MUTE

DUB278RMP 27