Clarion DVS9755z warranty In Case Of Difficulty, Error Displays, Problem, Cause, Measure

8. IN CASE OF DIFFICULTY

Problem	Cause		Measure
Power does not	Fuse is blown.	Replace with a fuse 3A of the same amperage. If the
turn on.		fuse blows again, consult your store of purchase.
(No sound is
produced.)	Incorrect wiring.	Consult your store of purchase.
	The microprocessor has	Press the reset button with a thin rod.
	malfunctioned due to noise,
	etc.
			Reset button
Nothing happens	The microprocessor has	Press the reset button with a thin rod.
when buttons are	malfunctioned due to noise,
pressed.	etc.
Disc cannot be	Another disc is already	Eject the disc before loading the new one.
loaded.	loaded.
The disc is	The disc has been inserted	Insert the disc with the label side up.
ejected as soon	upside down.
as it is inserted.
Sound skips or is	Disc is dirty.	Clean the disc with a soft cloth.
noisy.
	Disc is heavily scratched or	Replace with a disc with no scratches.
	warped.
Sound is bad	Water droplets may form on	Let dry for about 1 hour with the power on.
directly after	the internal lens when the
power is turned	car is parked in a humid
on.	place.

9. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.

Take the measures described below to eliminate the problem.

Error Display	Cause	Measure
ERROR 2	A DVD/CD is caught inside the DVD	This is a failure of DVD deck’s mechanism
	deck and is not ejected.	and consult your store of purchase.
ERROR 3	A DVD/CD cannot be played due to	Replace with a non-scratched,
	scratches, etc.	non-warped-disc.
ERROR 6	A DVD/CD is loaded upside-down inside	Eject the disc then reload it properly.
	the DVD deck and does not play.

If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase.

26 DVS9755z