Remote control unit button operations

CD Operations

The operations described in this chapter are per- formed using the remote control buttons.

Replacing discs

1.Slide the door downwards until a clicking sound is heard.

The disc is now automatically ejected.

If the disc is left as is and not removed, it will automatically be retracted into the unit after 15 seconds.

2.Insert the disc in the slot with the label side upwards.

When the disc has been inserted halfway, it is automatically pulled inside the unit.

When an inserted disc is not automatically

played back, press the [] button.

Dirt or dust on the data surface may gener- ate read errors. Wipe the disc with a soft cloth before insertion. If errors still occur, remove the disc.

3.Close the door.

Keep the door closed at all times to pre- vent dust from entering the unit.

Stopping playback

Press the [] button to stop playback.

Press the [] button to start playback from the location where playback was pre- viously stopped.

When the [] button is pressed again after the disc has been stopped, the disc is played back from the beginning.

Pausing playback

Press the [] button to pause playback. Nor-

mal playback is resumed when the [] button is pressed again.

Skipping tracks (to locate the beginning of a section)

Press the [] or [ ] button during playback.

The number of tracks corresponding to the num- ber of presses are skipped and playback is re- sumed.

Press the [] button to start playback from the beginning of the next track.

Press the [ ] button to start playback from the beginning of the current track. When this button is pressed again within 1 sec, playback starts from the beginning of the previous track.

Fast forward/fast backward

Hold down the [] or [ ] button during play- back.

When one of these buttons is held down, fast forward or fast backward starts within 1 sec. Normal playback speed is resumed when the button is released.

Intermittent sound can be heard during fast forward or fast backward playback.

Playing back discs

Press the [] button to start playback. Press-

ing the [] button again stops playback.

The [] and [ ] buttons are also used to locate the beginning of a section. When one of these buttons is held down for 1 sec or less, the beginning of a section is located and playback starts from there.

DVS9755z 17

Page 11
Image 11
Clarion DVS9755z warranty CD Operations, Skipping tracks to locate the beginning of a section