Radio Mode Operations

Listening to the radio

1.Press the [SRC] button and select the radio mode, then the radio will be on.

2.To select a preset band, press the [BND] button, then select one of the preset bands

such as FM1, FM2, FM3 or AM. Every time the [BND] button is pressed, the display will change as:

FM1 FM2

FM3 AM FM1...

3. Press the [

 

,

 

 

] lever upward or downward

 

 

to tune in the desired station.

Seek tuning

There are 2 types of seek tuning: DX SEEK and

LOCAL SEEK.

DX SEEK can automatically tune in to receivable broadcast stations; LOCAL SEEK can tune in to only broadcast stations with a good reception sensitivity.

1.Press the [BND] button and select the desired band (FM or AM (MW, LW)).

2.Tune into a station.

∗If “MANU” is lit in the display, press and hold the [BND] button for 1 second or longer.

“MANU” in the display goes off and seek tuning is now available.

∗If “TA” is lit in the display, TP stations are auto- matically sought.

Manual tuning

There are 2 ways available: Quick tuning and step tuning.

When you are in the step tuning mode, the frequency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency.

1.Press the [BND] button and select the desired band (FM or AM (MW/LW)).

∗If “MANU” is not lit in the display, press and hold the [BND] button for 1 second or longer.

“MANU” is lit in the display and manual tuning is now available.

2.Tune into a station.

∗If no operation is performed for more than 7 seconds, manual tuning is cancelled and the display returns to the previous mode.

• Quick tuning:

Press the [

 

,

 

] lever upward or downward

 

 

 

 

and hold in position for 1 second or longer to begin station tuning.

• Step tuning:

Press the [

 

,

 

] lever upward or downward

 

 

 

 

to perform manual tuning.

∗If no operation is performed for more than 7 sec- onds, manual tuning is cancelled and the display returns to the previous mode.

English

• DX SEEK

Press the [

 

,

 

] lever upward or downward

 

 

to start automatic station tuning.

When the lever is pressed upward, search will be performing in the direction of higher frequencies. When the lever is pressed downward, search will be performed in the direction of lower frequencies.

∗When seek tuning starts, “DX” appears in the display.

• LOCAL SEEK

If the lever is pressed upward or downward and held in position for 1 second or longer, local seek tuning will be enabled. Broadcast stations with good reception sensitivity are selected.

∗When local seeking starts, “LO” appears in the display.

Preset memory function

Preset memory function can store up to 24 stations:

six stations for each of FM1, FM2, FM3 and AM.

Manual memory function

1.Press the [BND] button, to select a band you want to store in the memory.

2. Press the [

 

,

 

] lever to tune into a desired

 

 

station.

 

 

 

 

3.Press and hold one of the [DIRECT] button for 2 seconds or longer to store the current station into preset memory.

DXZ368RMP 15