Operations Common to Each Mode

• Cellular phone interrupt setting

If you connect this unit and your cellular phone with a separately sold unit (BLT-433), you can listen to your telephone calls on your car speakers.

∗The factory default setting is “OFF”.

2-1. Select “TEL-SWITCH”.

3-1. Turn the [ROTARY] knob to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order:

OFF ON MUTE OFF...

• OFF:

This unit continues normal operation even when the cellular phone is used.

Note:

Entering titles

Titles up to 10 characters long can be stored in memory and displayed for CD, CD changer and TV stations. The number of titles that can be entered for each mode are as follows.

Mode

Number of titles

CD mode

50 titles

TV mode

20 titles

 

 

CD changer mode

Number of titles

DCZ628 connected

100 titles

CDC655Tz connected

100 titles

1.Press the [SRC] button to select the mode you want to enter a title (CD, CD changer or TV).

English

•If connecting a hands-free kit, please ensure the setting is ON to receive the telephone audio through the system.

•ON:

You can listen to your telephone calls from the speakers connected to this unit.

∗When listening to your calls on your car speak-

ers, you can adjust the volume by turning the [ROTARY] knob.

• MUTE:

The sound from this unit is muted during telephone calls.

•Triggered audio mute for cellular tele- phones

This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car.

∗This function is not compatible with all cellular telephones Contact your local authorized Clarion dealer for information on proper installation and compatibility.

∗The factory default setting is “OFF”.

• Performing a system check

This function allows you to perform a system check from the adjust mode when required.

2-1. Select “SYS CHK <E>”.

3-1. Press and hold the [ ] button for 1 second or longer.

“SYSTEM CHK” appears in the display, then the unit returns to the previous operation mode.

2.Select and play a CD in the CD changer or tune in to a TV station for which you want to enter the title.

3.Press the [D] button and display the title display.

4.Press and hold the [T] button for 1 second or longer.

The display switches to the title input display.

5.Press the [ , ] lever upward or downward to move the cursor.

6.Press the [BND] button to select a character.

Each time you press the [BND] button, the character changes in the following order:

Capital letters Numbers Symbols Umlaut Capital letters...

7.Turn the [ROTARY] knob to select the desired character.

8.Repeat steps 5 to 7 to enter up to 10 characters for the title.

9.Press and hold the [ ] button for 2 seconds or longer to store the title into memory and cancel title input mode.

DXZ368RMP 27