RDS Operations

4.Press the [ADJ] button to return to the previous mode.

∗If the reception of the current broadcast station deteriorates, “SEARCHING” appears in the display and the radio searches for the same programme on another frequency.

• ON:

“REG” in the display lights and REG function turns on.

• OFF:

“REG” in the display goes off and REG function turns off.

English

•AF function between RDS and DAB When the same programme is broadcasted by both RDS and DAB, and this function is ON, the unit switches to receive the broadcast with the better reception automatically.

∗This function only operates when the DAH923 or DAH913 DAB unit, sold separately, is connected.

∗This factory default setting is “ON”.

1.Press the [ADJ] button to switch to the adjustment selection display.

2. Press the [

 

,

 

] lever upward or downward

 

 

to select “LINK ACT”.

3.Turn the [ROTARY] knob to select “ON” or “OFF”.

• ON:

AF switching between DAB and RDS enabled.

• OFF:

AF switching between DAB and RDS disabled.

4.Press the [ADJ] button to return to the previous mode.

REG (Regional programme) function

When the REG function is ON, the optimum regional station can be received. When this function is OFF, if the regional station area switches as you drive, a regional station for that region is received.

∗The factory default setting is “OFF”.

Notes:

•This function is disabled when a national station such as BBC R2 is being received.

•The REG function ON/OFF setting is valid when the AF function is ON.

1.Press and hold the [ADJ] button for 1 second or longer to switch to the RDS adjustment selection display.

2. Press the [

 

,

 

] lever upward or downward

 

 

to select “REG”.

 

 

3.Turn the [ROTARY] knob to select “ON” or “OFF”.

4.Press the [ADJ] button to return to the previous mode.

Manually tuning a regional station in the same network

1.This function is valid when the AF function is ON and the REG function is OFF.

Note:

•This function can be used when a regional broad- cast of the same network is received.

2.Press any one of the [DIRECT] buttons to call out the regional station.

3.If the reception condition of the called out sta- tion is bad, press the [DIRECT] button of the same number. The unit receives a local station on the same network.

TA (Traffic Announcement)

In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement broadcast is received as top priority regardless of the function mode so you can listen to it. Traffic programme (TP) automatic tuning is also possible.

∗This function can only be used when “TP” is lit in the display. When “TP” is lit, this means that the RDS broadcast station being received has traffic announcement programmes.

• Setting the TA standby mode

If you press the [TA] button when only “TP” is lit in the display, “TP” and “TA” light in the display and the unit is set into the TA standby mode until a traffic announcement is broadcast. When a traffic announcement broadcast starts, “TRA INFO” appears in the display. If you press the [TA] button while a traffic announcement broadcast is being received, the traffic announcement broadcast reception is cancelled and the unit goes into the TA standby mode.

DXZ368RMP 17