RDS Operations
English • Cancelling the TA standby mode [ ]
As “ ” and “ ” lit in the display, press the button. The “TA” in the display goes off and the
TA standbyTP modeTA is cancelled.TA
∗If “TP” is not lit, pressing the [TA] button searches for a TP station.
• Searching for a TP station
When “TP” is not lit, if you press the [TA] button, “TA” in the display lights and the unit automatically receives a TP station.
Note:
•If a TP station is not received, the unit continues the search operation. Pressing [TA] button again goes off “TA” in the display and stops TP station searching.
Auto store function for TP stations
You can automatically store up to 6 TP stations into preset memory. If the number of TP can be received less than 6, broadcast stations already stored in memory and left without being overwrit- ten.
As “TA” lit in the display, press and hold the [ ] button for 2 seconds or longer. The TP stations with the good reception sensitivity are stored into preset memory.
∗Even if you select FM1 or FM2, a TP station is stored into memory for FM3.
RDS MODE adjustment
Press and hold the [ADJ] button for 1 second or longer to select the RDS MODE.
The mode switches as follows each time the [ , ] lever are pressed upward or downward:
PTY ON | |
ON∗ | INFO SEL (E) .... |
Press [ADJ] button to exit RDS MODE.
∗“REG ON” only available when “AF ON”.
PTY
This function enables you to listen to a broadcast of the selected programme type even if the unit is on a function mode other than radio.
∗Some countries do not yet have PTY broadcast.
∗In the TA standby mode, a TP station has priority over a PTY broadcast station.
∗The factory default setting is “OFF”.
1.Press and hold the [ADJ] button for 1 second or longer to switch to the RDS adjustment selection display.
2. Press the [ , ] lever upward or downward to select “PTY”.
3.Turn the [ROTARY] knob to select “ON” or “OFF”.
• ON:
“PTY” in the display lights and PTY standby mode is turned on. When the selected PTY broadcast starts, the PTY item name appears in the display.
• OFF:
“PTY” in the display goes off and PTY standby mode is cancelled.
4.Press the [ADJ] button to return to the previous mode.
•Cancelling a PTY interrupt broadcast
Press the [TA] button during the PTY interrupt broadcast, the PTY interrupt is cancelled and the unit returns to PTY standby mode.
Selecting PTY
1.Press and hold the [ADJ] button for 1 second or longer to switch to the RDS adjustment mode.
2. | Press the [ |
| , |
| ] lever upward or downward | |||
|
| |||||||
|
| |||||||
| to select | |||||||
3. | Press the [ |
|
|
| ] button. | |||
|
|
4.Press any one of the [DIRECT] buttons to call the Preset Memory for PTY selection..
Alternatively, turn the [ROTARY] knob to select the desired PTY.
5.Press the [ADJ] button to return to the previous mode.
∗Below are the factory default settings stored for the [DIRECT] buttons.
18 DXZ368RMP