Operations Common to Each Mode
●Setting the dimmer control
You can set the dimmer control “ON” or “OFF”.
∗The factory default setting is “ON”.
●
The red
∗The factory default setting is “OFF”.
●Setting the external amplifier
∗The factory default setting is “OFF”.
• ON:
Use with connected AMP.
• OFF:
Use with inside AMP.
●Setting the car speaker output for the
cellular phone
∗The factory default setting is “RIGHT”.
∗To output the telephone calls, set the cellular phone interrupt to “ON”.
• RIGHT:
Telephone calls can be heard on the front right speaker connected to this unit.
• LEFT:
Telephone calls can be heard on the front left speaker connected to this unit.
●Cellular phone interrupt setting
If you connect this unit and your cellular phone with a separately sold cable, you can listen to your telephone calls on your car speakers.
∗The factory default setting is “OFF”.
English
●Set the cellular phone connection
mode (AUX/CeNET)
You can listen to your telephone calls from the speakers connected to this unit.
∗The factory default setting is “AUX”.
• AUX:
AUX input jack in front panel is for cellular phone audio input, when the AUX input jack is used to connect an AUX BLUETOOTH BB (BLT373) (sold separately).
• CENET:
CENET input cable is for cellular phone audio input, when a CeNET cable is used to connect a cellular phone (BLT433 or
“ON” ↔ “OFF” ↔ “MUTE”
• ON:
You can listen to your telephone calls from the speakers connected to this unit.
∗When listening to your calls on your car speakers, you can adjust the volume by turning the [ROTARY] knob.
• OFF:
This unit continues normal operation even when the cellular phone is used.
• MUTE:
The sound from this unit is muted during telephone calls.
Note:
•If connecting a
DXZ378RMP/DXZ379RMP 25