CD/MP3/WMA Operations

Set the type of file to be played

Listening to a disc already loaded

(multi-session function)

in the unit

English

When a single disc holds both normal CD type tracks and MP3/WMA type tracks, use this command to select which type of track to play.

∗Default setting is “MULTI-SESS CD”.

•When only one type of track (either music CD or MP3/WMA) is recorded on a disc, selecting either type will allow playback of the disc.

•When playing CCCD (copy-control CDs), set to CD type.

1.Press and hold the [BND] button for 1 second or longer.

Each time the button is held pressed in this way, the playback type alternates between CD type and MP3/WMA type.

• MULTI-SESS CD

When playing music CD only.

• MULTI-SESS MP3

When playing music MP3/WMA only.

2.When setting is completed, remove the disc and reinsert it.

Backup Eject function

Just pressing the [Q] button, ejects the disc even if the power to the unit was not turned on.

1.Press the [OPEN] button to open the FLIP DOWN PANEL.

Note:

•If the FLIP DOWN PANEL will not open far enough, open it gently with your hand.

2.Press the [Q] button. Remove the disc after it is ejected.

3.Close the FLIP DOWN PANEL.

Notes:

•Always close the FLIP DOWN PANEL once you take out the disc.

•If you force a CD into before auto reloading, this can damage the CD.

•If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded (Auto reload).

Press the [SRC] button to select the CD/MP3/ WMA mode.

When the unit enters the CD/MP3/WMA mode, play starts automatically.

If there is no disc loaded, the indication “NO DISC” appears in the title display.

The mode changes each time the [SRC] button is pressed. (Modes are not displayed for equipment that is not connected.)

Radio ➜ (DAB) ➜ CD/MP3/WMA ➜ (iPod BB) ➜ (CD changer) ➜ (DVD changer) ➜ (TV) ➜ AUX ➜ Radio ...

Loading a CD

1.Press the [OPEN] button to access the CD SLOT behind the FLIP DOWN PANEL.

2.Insert a CD into the center of the CD SLOT with the labeled side facing up. The CD plays automatically after loading.

Notes:

•Never insert foreign objects into the CD SLOT.

•If the CD is not inserted easily, there may be

another CD in the mechanism or the unit may require service.

•Discs not bearing the or mark and CD-ROMs cannot be played by this unit.

•Some CDs recorded in CD-R/CD-RW mode may not be usable.

3. Close the FLIP DOWN PANEL.

CAUTION

Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL.

Notes:

•If the FLIP DOWN PANEL does not open fully, gently open with your hand.

•After loading a CD, always close the FLIP DOWN PANEL.

DXZ378RMP/DXZ379RMP 21