English
Basic Operations
Sound Adjustment | When “IMPACT” is set: | ||||||
| Press the [ |
|
|
| ] button. | ||
You can adjust a sound effect or tone quality to | |||||||
|
| ||||||
Press the [w] or [z] button to adjust the | |||||||
your preference. | |||||||
|
|
|
|
|
|
bass and treble in the range of +3 to
To change sound setting
1.Press the [] button to switch to the sound adjustment selection display.
∗The factory default sound setting is “Z- EHCR”.
2.Then press the [x] or [v] button to select the sound adjustment mode. Each time you press the [x] or [v] button, the sound adjustment mode changes as following order:
∗In the case of display blinking “ENT”, you
can press the [ ] button to adjust the setting value.
3.Press the [w] or [z] button to adjust the selected audio mode.
4.After completing settings, press the [] button to return to the previous mode.
●Setting the
This unit are provided with 3 types of sound tone effects stored in memory.
Select the one you prefer.
∗The factory default setting is “OFF”.
“EXCITE” ↔ “IMPACT” ↔
EXCITE : bass and treble emphasized mid deemphasized
IMPACT : bass and treble emphasized
OFF : no sound effect
When “EXCITE” is set:
∗The factory default setting is “0”.
∗The factory default setting is “0”.
When
∗The factory default setting is “0”.
●Adjusting the bass
This adjustment can be performed only when the
∗The factory default setting is “0”. (Adjustment range: +8 to
●Adjusting the treble
This adjustment can be performed only when the
∗The factory default setting is “0”. (Adjustment range: +7 to
●Adjusting the balance
∗The factory default setting is “CENTER” (center). (Adjustment range: RIGHT12 to LEFT12 (right 12 to left 12))
●Adjusting the fader
∗The factory default setting is “CENTER” (center). (Adjustment range: FRONT12 to REAR12 (front 12 to rear 12))
Note:
•During SOUND adjustment mode, if no operation is performed for more than 10 seconds, this mode can be cancelled and return to previous mode.
12 DXZ378RMP/DXZ379RMP