CD/MP3/WMA Operations

English

●File extensions

1.Always add a file extension “.MP3” or “.WMA” to MP3 or WMA file by using single byte let- ters. If you add a file extension other than specified or forget to add the file extension , the file cannot be played.

2.Files without MP3/WMA data will not play. The indication “––:––” appears in the play time display if you attempt to play files with- out MP3/WMA data.

●Logical format (File system)

1.When writing MP3/WMA file on a CD-R disc or CD-RW disc, please select “ISO9660 level 1, 2 or JOLIET or Romeo” as the writing soft- ware format. Normal play may not be possible if the disc is recorded on another format.

2.The folder name and file name can be dis- played as the title during MP3/WMA play but the title must be within 128 single byte alpha- betical letters and numerals (including an ex- tension).

3.Do not affix a name to a file inside a folder having the same name.

●Folder structure

1.A disc with a folder having more than 8 hier- archical levels will be impossible.

●Number of files or folders

1.Up to 255 files can be recognized per folder. Up to 500 files can be played.

2.Tracks are played in the order that they were recorded onto a disc. (Tracks might not always be played in the order displayed on the PC.)

3.Some noise may occur depending on the type of encoder software used while recording.

Multisession function

When a disc contains both normal CD type tracks and MP3/WMA type tracks mixedly, you can select which type of the recorded tracks to play.

●Default value is “CD”.

Each time you press and hold the [BND] button for 1 second or longer, the mixed mode is switched between CD type or MP3/WMA type. The following indication appears in the title display when switching the track type to be played.

●Display when CD type track is selected:

●Display when MP3/WMA type track is se- lected:

1.Types of recording that can be played are as follows.

Setting

Set to CD

Set to MP3/WMA

Disc

 

 

Mixed with CD and

Play CD

Play MP3/WMA

MP3/WMA type tracks

CD type track only

Play CD

Play CD

MP3/WMA type track only

Play MP3/WMA

Play MP3/WMA

 

 

 

2.After making these settings, remove the disc and then reinsert it.

3.When a mixed mode CD is loaded and CD is set, the track to be played first is MP3/WMA file data and no sound is heard.

Note:

•When playing a CCCD (Copy Control CD), set the setting to CD type. When this is set to MP3/WWA type, the CD cannot be played normally in some cases.

Backup Eject function

Just pressing the [Q] button ejects the disc even if the power to the unit was not turned on.

1.Press the [OPEN] button to open the FLIP DOWN PANEL.

Note:

•If the FLIP DOWN PANEL will not open far enough, open it gently with your hand.

2.Press the [Q] button. Remove the disc after it is ejected.

3.Close the FLIP DOWN PANEL.

Notes:

•Always close the FLIP DOWN PANEL once you take out the disc.

•If you force a CD into before auto reloading, this can damage the CD.

•If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded. (Auto reload).

•8 cm CDs are not auto reloaded. Be sure to re- move it when ejected.

20 DXZ648RMP