Clarion DXZ648RMP Operations Common to Each Mode, Dimmer control, AUX function, Selecting the CONTRAST mode, Anti-theftindicator, Setting LOW PASS FILTER, Selecting AUX/TEL

Operations Common to Each Mode

Dimmer control

You can setting the dimmer control “ON” or “OFF”.

∗The factory default setting is “ON”.

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button to select “DIM- MER”.

3.Turning the [ROTARY] knob clockwise or counterclockwise to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order:

LPF REAR ➜ LPF 50 Hz ➜ LPF 80 Hz ➜

LPF 120 Hz

4.Press the [T] button to return to the previous mode.

English

3.	Turning the [ROTARY] knob clockwise or	AUX function
	counterclockwise and select “ON” or “OFF”.	This system has an external input jack so you
4.	Press the [T] button to return to the previous	can listen to sounds and music from external
	mode.	devices when connected to this unit.

Selecting the CONTRAST mode

∗The factory default setting is “5”.

1.Press and hold the button [T] for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button to select “CON- TRAST”.

3.Turning the [ROTARY] knob to select from 1- 16.

4.Press the [T] button to return to the previous mode.

Anti-theft indicator

The red Anti-theft indicator is a function for preventing theft. When the DCP is removed from the unit, this indicator blinks.

∗The factory default setting is “OFF”.

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button and select “BLINK LED”.

3.Turning the [ROTARY] knob clockwise to set this function “ON” or turn it counterclockwise to switch this function “OFF”.

4.Press the [T] button to return to the previous mode.

Setting LOW PASS FILTER

∗The factory default setting is “LPF 120 Hz”.

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button and select “SUB-W LPF”.

Selecting AUX/TEL

You can listen to sounds and music from external devices or your telephone calls from the speakers when connected to this unit.

When TEL INT or External device is connected to this unit, you can select TEL mode or AUX mode.

∗The factory default setting is “AUX”.

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button and select “AUX/TEL”.

3.Turning the [ROTARY] knob clockwise or counterclockwise as needed and select from “AUX” or “TEL”.

● AUX :

AUX/TEL input cable is for external Audio input.

●TEL :

AUX/TEL input cable is for cellular phone audio input.

4.Press the [T] button to return to the previous mode.

Selecting AUX IN sensitivity

Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume.

∗The factory default setting is “AUX MID”.

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button and select “AUX SENS”.

DXZ648RMP 25