Basic Operations

1.Press the [A-M] button, “SW-VOL 0” appears in the display.

2.Turning the [ROTARY] knob to select from –6 to +6.

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Turning the [ROTARY] knob clockwise or counterclockwise to select the Q-curve.

∗The factory default setting is “BÅQ 1Δ. (Adjust- ment 1/1.25/1.5/2)

5.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

English

Adjusting the tone

Press the [A-M] button and select the item to adjust. Each time you press the [A-M] button, the item changes as following order:

●When “BASS BOOST” is set

“SW-VOL 0” ➜ “B-BOOST 0” ➜ “BAL 0” ➜ “FADER 0” ➜ Last function mode.

●When “IMPACT” is set

“SW-VOL 0” ➜ “IMPACT 0” ➜ “BAL 0” ➜ “FADER 0” ➜ Last function mode.

●When “EXCITE” is set

“SW-VOL 0” ➜ “EXCITE 0” ➜ “BAL 0” ➜ “FADER 0” ➜ Last function mode.

●When “CUSTOM” is set

“SW-VOL 0” ➜ “BASS” ➜ “TREBLE” ➜ “BAL 0” ➜ “FADER 0” ➜ Last function mode.

●When “Z+ OFF” is set

“SW-VOL 0” ➜ “BAL 0” ➜ “FADER 0” ➜

Last function mode.

Note:

•As subwoofer is effective, “SW-VOL 0” can be selected.

Adjusting the bass (Gain,

Frequency, Q-curve)

This adjustment can be performed when the Z- Enhancer Plus is set to “CUSTOM”.

1.Press the [A-M] button and select “BASS”.

2.Turning the [ROTARY] knob clockwise em- phasizes the bass; turning it counterclock- wise attenuates the bass.

∗The factory default setting is “BÅGAIN 0Δ. (Adjustment range: –6 to +8)

3.Press the [a] or [d] button to select “BÅFREQ 50Δ.

Turning the [ROTARY] knob clockwise or counterclockwise to select the frequency.

∗The factory default setting is “BÅFREQ 50Δ.(Adjustment 50/80/120 Hz)

4.Press the [a] or [d] button to select “BÅQ 1Δ.

Adjusting the treble (Gain,

Frequency)

This adjustment can be performed when the Z- Enhancer Plus is set to “CUSTOM”.

1.Press the [A-M] button and select “TREBLE”.

2.Turning the [ROTARY] knob clockwise em- phasizes the treble; turning it counterclock- wise attenuates the treble.

∗The factory default setting is “TÅGAIN 0Δ. (Adjustment range: –6 to +6)

3.Press the [a] or [d] button to select “TÅFREQ 12kΔ.

Turning the [ROTARY] knob clockwise or counterclockwise to select the frequency.

∗The factory default setting is “TÅFREQ 12kΔ. (Adjustment 8 kHz/12 kHz)

4.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the balance

1.Press the [A-M] button and select “BAL 0”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “BAL 0”. (Adjust- ment range: L13 to R13)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the fader

1.Press the [A-M] button and select “FADER 0”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.

∗The factory default setting is “FADER 0”. (Ad- justment range: F12 to R12)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

DXZ648RMP 13