English
Operations Common to Each Mode
3. Turning the [ROTARY] knob clockwise or | ● ON: |
counterclockwise as needed and select from | You can listen to your telephone calls from |
“AUX LOW”, “AUX MID” or “AUX HIGH”. | the speakers connected to this unit. |
4. Press the [T] button to return to the previous | ∗ When listening to your calls on your car |
mode. | speakers, you can adjust the volume by turn- |
| ing the [ROTARY] knob. |
Setting the car speaker output for the cellular phone (Optional TEL-002)
∗The factory default setting is “RIGHT”.
∗To output the telephone calls, set the cellular phone interrupt to ON.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select
3.Turning the [ROTARY] knob clockwise to se- lect “RIGHT” or counterclockwise to select “LEFT”.
● RIGHT:
Telephone calls can be heard on the front right speaker connected to this unit.
●LEFT:
Telephone calls can be heard on the front left speaker connected to this unit.
4.Press the [T] button to return to the previous mode.
Cellular phone interrupt setting
If you connect this unit and your cellular phone with a separately sold unit
∗The factory default setting is “OFF”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “TEL- SWITCH”.
3.Turning the [ROTARY] knob clockwise or counterclockwise to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order:
OFF ➜ ON ➜ MUTE ➜ OFF...
●OFF:
This unit continues normal operation even when the cellular phone is used.
Note:
•If connecting a
●MUTE:
The sound from this unit is muted during telephone calls.
4.Press the [T] button to return to the previous mode.
Setting the button illumination
Press the [COLOR] button to select a color type. Each time you press the [COLOR] button, the type changes in the following orders:
COLOR SCAN ➜ RED ➜ MANDARIN ➜ ORANGE ➜ AMBER ➜YELLOW ➜
➜USER ➜ COLOR SCAN…
●Setting COLOR SCAN mode
As selecting “COLOR SCAN”, the color automatically changes.
∗The factory default setting is “COLOR SCAN”.
∗After 3 seconds the color changes to the other.
●Setting USER mode
The factory default setting is “R>8 G>8” (R:red, G:green).
As selecting “USER”, press and hold the
[COLOR] button for 1 second or longer “R>8 G>8” appears in the display.
1.Press the [a] or [d] button to move the cursor.
2.Turning the [ROTARY] knob clockwise or counterclockwise to select from 0 to 8.
3. Press and hold the [ |
| ] button for 2 sec- | |
onds or longer to store the color in memory | |||
and cancel setting mode. |
| ||
|
|
|
|
COLOR | R | G | |
RED | 8 | 0 | |
MANDARIN | 8 | 1 | |
ORANGE | 8 | 2 | |
AMBER | 8 | 5 | |
YELLOW | 8 | 8 | |
6 | 8 | ||
LIME | 4 | 8 | |
GREEN | 2 | 8 | |
0 | 8 |
26 DXZ648RMP