Basic Operations

Adjusting the bassAdjusting the balance

English

The bass gain, bass FREQ (center frequency) and bass Q can be adjusted as follows.

1. Press the [A-M] button and select “ BASS GAIN 0”.

2.Press the [a, d] lever upward or downward and select from

“

BASS GAIN 0” ➜ “ BASS FREQ 50” ➜

“

BASS Q 1” ➜ “ BASS GAIN 0”…

3.Turn the [ROTARY] knob to adjust the gain, the FREQ (center frequency) and the Q.

BASS GAIN : –6 to 8 (The factory default setting is “0”)

1.Press the [A-M] button and select “BALANCE 0”.

2.Turning the [ROTARY] knob clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “0”. (Adjustment range: L13 to R13)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

BASS FREQ : 50Hz/80Hz/120Hz (The factory default setting is “50”)

BASS Q : 1/1.25/1.5/2 (The factory default setting is “1”)

4.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the fader

1.Press the [A-M] button and select “FADER 0”.

2.Turning the [ROTARY] knob clockwise emphasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.

∗The factory default setting is “0”. (Adjustment range: F12 to R12)

Adjusting the treble

The treble gain and treble FREQ (center frequency) can be adjusted as follows.

1.Press the [A-M] button and select “ TREBLE GAIN 0”.

2.Press the [a, d] lever upward or downward and select from

“ TREBLE GAIN 0” ➜ “ TREBLE FREQ 12K” ➜ “ TREBLE GAIN 0”…

3.Turn the [ROTARY] knob to adjust the gain and the FREQ (center frequency).

TREBLE GAIN : –6 to 6 (The factory default setting is “0”)

TREBLE FREQ : 8KHz/12KHz (The factory default setting is “12K”)

4.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting MAGNA BASS EXTEND

The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.

∗ The factory default setting is off.

1.Press and hold the [A-M] button for 1 second or longer to turn on the MAGNA BASS EXTEND effect. “M-BASS EX ON” lights in the display.

2.Press and hold the [A-M] button for 1 second or longer to turn off the MAGNA BASS EXTEND effect. “M-BASS EX OFF” lights in the display.

14 DXZ655MP