Radio Operations
1.Press the [SRC] button and select the radio mode. The frequency appears in the display.
2.Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM1 ➜ FM1...
3.Press the [a, d] lever upward or downward to tune in the desired station.
TuningThere are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.
Seek tuning1.Press the [BND] button and select the desired band (FM or AM).
∗If “MANU” is lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” in the display goes off and seek tuning is now available.
2.Press the [a, d] lever upward or downward to start automatic station tuning.
When the lever is pressed upward, search will be performing in the direction of higher frequencies. When the lever is pressed downward, search will be performed in the direction of lower frequencies.
Manual tuningThere are 2 ways available: Quick tuning and step tuning.
When you are in the step tuning mode, the frequency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency.
1.Press the [BND] button and select the desired band (FM or AM).
∗If “MANU” is not lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” is lit in the display and manual tuning is now available.
2.Tune into a station.
●Quick tuning:
Press the [a, d] lever upward or downward and hold in position for 1 second or longer to begin station tuning.
●Step tuning:
Press the [a, d] lever upward or downward to perform manual tuning.
A total of 24 preset positions
1.Press the [BND] button and select the desired band (FM or AM).
2.Press the corresponding [DIRECT] button to recall the stored station.
∗Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store that station into preset memory.
Manual memory1.Select the desired station with seek tuning, manual tuning or preset tuning.
2.Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.
Auto storeAuto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position.
1.Press the [BND] button and select the desired band (FM or AM).
2.Press and hold the [ ] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.
∗If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations.
Preset scanPreset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory.
1.Press the [ ] button.
2.When a desired station is tuned in, press the
[ ] button again to continue receiving that
station.
Note:
•Be careful not to press and hold the [ ] button for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations.
English
DXZ655MP 15