English

CD/MP3/WMA Operations

1. Press and hold the [RDM] button for 1

 

 

second or longer to perform folder random

 

play.

 

“ RDM” appears in the display.

●To cancel play

1.Press the operating button previously selected.

Play list mode

This function allows you to play tracks, up to latest 5 time stamps, by reading the play list information written on the disc.

1.Press and hold the [P.LIST] button for 1 second or longer to turn on or off the play list mode.

∗Play list play is possible only when there is a file whose extension is “.M3U” on the CD-R/ RW.

∗Up to 5 play lists can be recognized, and up to 255 files can be recognized per play list.

2.Press the [a, d] lever upward or downward to change the track.

3.Press the [DN] button to move to the previous play list.

Press the [UP] button to move to the next play list.

Notes:

•The SCN/RPT/RDM functions cannot be used while in the play list mode.

•The title display changes from folder name to play list name.

Making a play list

1.Write desired tracks to a CD-R/RW, etc. Be sure to use alphanumeric/ASCII characters for all file names.

2.Make a play list by using a multimedia player, etc. and save the data. The file format must be M3U.

3.Again, write this play list to the CD-R/RW, etc.

Notes:

•When writing to a CD-R/RW, etc., be sure to use alphanumeric/ASCII characters.

•Up to 5 layers can be recognized as a list. For written play lists, latest 5 lists are recognized in the order in which they are written.

•When writing to a CD-R/RW, etc., turn off the Disc At Once function.

•When adding a play list, it is recommended to write it in the Root folder.

20 DXZ655MP

Operations Common to Each Mode

To change display setting

1.Press and hold the [D] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a, d] lever upward or downward to select the “item name”.

“CLOCK” ↔ “SPE/ANA PTN” ↔ “S/A SENS” ↔ “S/A SPEED” ↔ “SCREEN SVR” ↔ “MSG INPUT” ↔ “AUTO SCROLL” ↔ “SCRL SPEED” ↔ “DIMMER LV” ↔ “CONTRAST”

3.Turn the [ROTARY] knob to select the “desired setting value”.

∗In the case of item names appearing with the “Push ENT” suffix, after the item name, the

[ ] button must be pressed to display the setting value.

∗After completing settings, press the [D] button to return to the previous mode.

●Setting the clock

2-1. Select “ CLOCK ”.

3-1. Press the [] button.

3-2. Press the [a, d] lever upward or downward to select the hour or the minute.

3-3. Turn the [ROTARY] knob to set the correct time.

∗The clock is displayed in 12-hour format.

3-4. Press the [ ] button to store the time into memory.

Note:

•You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car’s battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled.

●Setting the spectrum analyzer pattern

∗The factory default setting is “1”

2-1. Select “ SPE/ANA PTN”.

• When the Main display or Title display is set

3-1. Turn the [ROTARY] knob to select the setting.

Each time you turn the [ROTARY] knob, the setting changes in the following order:

“ SPE/ANA PTN 1” ➜ “ SPE/ANA PTN 2” ➜ “ SPE/ANA PTN 3” ➜ “ SPE/ ANA PTN 4” ➜ “ SPE/ANA PTN SRC

ICON”

• When the Sub display is set

3-2. Turn the [ROTARY] knob to select the setting.