TV Operations
English
Note:
•The following operations are performed the same as for radio mode:
∗Channel selection
∗Storing channels in memory
∗Calling channels from memory ∗Auto store
∗Preset scan
See “Radio Operations” (page
TV tuner functions
When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV requires a TV tuner and monitor.
Setting the TV diver
You can change the reception setting for the TV antenna connected to the TV tuner.
1.Press the [OPTION] button to switch to the adjustment selection display.
2.Push the [SEEK PANEL] leftward or rightward to select “TV DIVER”.
3.Push the [P.CH] button upward or downward to set to “ON” or “OFF”.
• ON:
Sets the diver setting to ON.
• OFF:
Sets the diver setting to OFF.
4.Press the [OPTION] button to return to the previous mode.
Watching a TV
1.Press the [SRC] button and select the TV mode.
2.Press the [MENU] button to select the desired TV band (TV1 or TV2). Each time the button is pressed, the input selection toggles between TV1 and TV2.
3.Push the [SEEK PANEL] leftward or rightward to tune in the desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which 1 external device can be connected. Connect a 12 V video cassette player (VCP) or video cassette recorder (VCR) to the TV tuner input terminal.
1.Press the [OPTION] button.
2.Push the [SEEK PANEL] leftward or rightward to select “TV/VTR”.
3.Press the [
] button to enter the VTR mode.
4.To return to the TV broadcast, press the [OPTION] button.
5.Press the [
] button to return to the TV mode.
32 DXZ675USB
