Basic Operations
MID F : 700Hz/1KHz/2KHz (The fac- tory default setting is “1k”)
MID Q : 1.5/2 (The factory default set- ting is “2”)
4.When the adfustment is complete, press the [A] button several times until the function mode is reached.
Adjusting the Beat EQ
1.Press the [BEQ] button and select the Beat EQ mode (1 to 3) to adjust.
2.Press the [A] button and select “BASS BOOST or IMPACT or EXCITE”.
3.Turning the [ROTARY] knob clockwise ad- justs in the + direction; turning it counter- clockwise adjusts in the – direction.
English
Adjusting the TREBLE
The treble gain and treble F (center frequency) can be adjusted as follows.
1.Press the [A] button and select “TREB <GAIN>”.
2.Press the [a] or [d] button and select from “TREB <GAIN>” ➜ “TREB <F 12K>” ➜ “TREB <GAIN>”.
∗When BASS BOOST is selected, you can ad- just the bass in the range of
∗When IMPACT and EXCITE is selected, you can adjust the bass and treble in the range of
4.When the adjustment is complete, press the [A] button several times until the function mode is reached.
3.Turn the [ROTARY] knob clockwise or coun- terclockwise as needed and adjust the gain and the F (center frequency).
TREB GAIN :
TREB F : 8KHz/12KHz (The Factory default setting is “12K”)
4.When the adjustment is complete, press the [A] button several times until the function mode is reached.
Adjusting the balance
1.Press the [A] button and select “BALANCE”.
2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.
∗The factory default setting is “0”. (Adjustment range: L13 to R13)
3.When the adjustment is complete, press the [A] button several times until the function mode is reached.
Turning on/off the loudness
The loudness effect emphasizes the bass to create a natural sound tone. When you are lis- tening to music at a low volume, it is recom- mended to use the loudness effect.
1.Press and hold the [A] button for 1 second or longer to turn on the loudness effect. When the loudness effect is turned on, “LD” lights in the display.
2.Press and hold the [A] button for 1 second or longer to turn off the loudness effect. “LD” goes off in the display.
Note:
•When using a sold separately digital sound pro- cessor (DPH910), a feature called auto loudness is selected. This function is different from the loudness effect. For further details on the auto loudness feature, refer to the subsection “Output adjustment of auto loudness, subwoofer and playback band” in section “DSP Operations”.
Adjusting the fader
1.Press the [A] button and select “FADER”.
2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.
∗The factory default setting is “0”. (Adjustment range: F12 to R12)
3.When the adjustment is complete, press the [A] button several times until the function mode is reached.
DXZ725 15
