Clarion DXZ725 owner manual Editing/storing a sound field menu User memory, Selecting an VSE menu

DSP Operations

Selecting a sound field menu VSE effect ON/OFF

English

1.Press the [A] button and select “DSF”. “DSF” blinks in the display.

2.Press the [BND] button to select “BSC1” (ba- sic-1) or “BSC2” (basic-2). “BSC1” or “BSC2” is displayed in the function mode indication in the display.

3.Press one of the [DIRECT] buttons and se- lect the desired sound field menu.

∗To select the user memory, press the

[BND] button to select “USR” and press one of the [DIRECT] buttons.

While the “VSE” indication is lit in the display, the VSE effect is set to “ON”.

∗The factory default setting is “ON”.

1.Press the [A] button and select “VSE”.

2.Press the [D] button. “VSE” in the display lit or unlit.

∗When “VSE” is unlit, the VSE effect is set to OFF.

Note:

•If the VSE effect is set to OFF, the adjustment made in “VSE operations” is not reflected in the music source.

Editing/storing a sound field menu (User memory)

1.Select a sound field menu which you want to edit on the basis of.

2.Press and hold the [T] button for 1 second or longer.

3.Press the [a] or [d] button to select the item to be adjusted.

There are “EFFECT”, “DELAY”, “REAR MIX”, “REV.TIME” or “ROOM SIZE” and “HIGH” or “LIVENESS” available for the items to be ad- justed.

∗For details on each adjustment item, refer to the owner’s manual supplied with the DPH910.

4.Turn the [ROTARY] knob clockwise or coun- terclockwise to make the adjustment.

5.Repeat steps 3 to 4 to complete the adjust- ment and press the [T] button.

6.Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the edited contents.

∗You can give a title to the user memory. For the inputting method of titles, refer to the sub- section “Entering titles” in section “Opera- tions common to each mode”.

Professional mode/VSE operations

Note:

•The adjustment made in professional mode is not reflected in the adjustment in standard mode. On the contrary, the adjustment made in standard mode is not reflected in the adjustment in profes- sional mode.

Selecting an VSE menu

1.Press the [A] button and select “VSE”.

2.Press the [BND] button to select “BASC” (ba- sic). “BASC” is displayed in the function mode indication in the display.

3.Press one of the [DIRECT] buttons and se- lect the desired VSE menu.

∗To select the user memory, press the [BND] button to select “USR” and press one of the [DIRECT] buttons.

Editing/storing an VSE menu (User memory)

1.Select an VSE menu which you want to edit on the basis of.

2.Press and hold the [T] button for 1 second or longer.

3.Press the [a] or [d] button to select the item to be adjusted.

There are “DIFFUSE”, “CAR WIDTH” and

“CAR LENG” available for the items to be ad- justed.

∗For details on each adjustment item, refer to the owner’s manual supplied with the DPH910.

4.Turn the [ROTARY] knob clockwise or counterclockwise to make the adjustment. The adjustment range is from 1 to 10 for each item.

5.Repeat steps 3 to 4 to complete the adjust- ment and press the [T] button.

6.Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the edited contents.

∗You can give a title to the user memory. For the inputting method of titles, refer to the sub- section “Entering titles” in section “Opera- tions common to each mode”.

28 DXZ725