Clarion DXZ725 owner manual Operations Common to Each Mode, Entering titles, Clearing titles

Operations Common to Each Mode

Entering titles

Titles up to 10 characters long can be stored in memory and displayed for CD, CD changer and TV stations. The number of titles that can be en- tered for each mode are as follows.

Mode	Number of titles
CD mode	50 titles
TV mode	15 titles
CD changer mode	Number of titles
DCZ625 connected	100 titles
CDC1255z connected	50 titles

1.Press the [FNC] button to select the mode you want to enter a title (CD, CD changer or TV).

2.Select and play a CD in the CD changer or tune in to a TV station for which you want to enter the title.

3.Press the [D] button and display the main.

4.Press the [T] button. “TTL” appears in the dis- play and the cursor position flashes.

5.Press the [a] or [d] button to move the cursor.

6.Press the [D] button to select a character. Each time you press the [D] button, the char- acter changes in the following order:

Capital letters ➜ Numbers ➜ Symbols ➜ Umlaut ➜ Capital letters...

7.Turn the [ROTARY] knob to select the de- sired character. Turning the [ROTARY] knob clockwise moves the cursor to the next char- acter; turning it counterclockwise moves the cursor to the previous character.

8.Repeat steps 5 to 7 to enter up to 10 charac- ters for the title.

9.Press and hold the [ ] button for 2 sec- onds or longer to store the title into memory and cancel title input mode.

Clearing titles

1.Select and play a CD in the CD changer or tune in to a TV station for which you want to clear the title.

2.Press the [D] button and display the main.

3.Press the [T] button. “TTL” appears in the dis- play and the display switches to the title input display.

4.Press the [BND] button.

5.Press and hold the [ ] button for 2 sec- onds or longer to clear the title and cancel title input mode.

Turning the external output adjustment display on/off

When not using the external output, you can turn off the “NON-FADER” display.

∗The factory default setting is “ON”.

∗Even if the level adjustment display is set to

“OFF”, signals can be output from the external output.

1.Press and hold [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button to select “NON- FADER”.

3.Turn the [ROTARY] knob clockwise to set “ON” or counterclockwise to set “OFF”.

● ON:

When you press the [A] button, the “NON- FAD VOL” item is displayed.

∗The output level can be adjusted.

●OFF:

Even when you press [A] button, the “NON- FAD VOL” item is not displayed.

∗ The output level cannot be adjusted.

4.Press [T] button to return to the previous mode.

Hi / Lo dimmer control

You can adjust the reduced illumination level of the dimmer.

∗The factory default setting is “ON”.

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button to select “DIM- MER”.

3.Turn the [ROTARY] knob clockwise to “ON” or counterclockwise to “OFF”.

4.Press the [T] button to return to the previous mode.

English

DXZ725 19