Operations Common to Each Mode

Dimmer level

Setting the Subwoofer

You can adjust the reduced illumination level of the dimmer.

∗The factory default setting is “LV3”. (Adjustment range is LV1 to LV5)

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button to select the “ÅDIMMER LVΔ.

3.Turn the [ROTARY] knob clockwise or coun- terclockwise to adjust the reduced illumina- tion level of the dimmer.

You can set the subwoofer on or off.

∗The factory default setting is “ON”.

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button and select “Å SUB-WΔ.

3.Turn the [ROTARY] knob clockwise or coun- terclockwise and select “ON” or “OFF”.

4.Press the [T] button to return to the previous mode.

English

● LV1 to LV5:

The dimmer operation is performed depend-

Setting LOW PASS FILTER

∗ The factory default setting is “THRGH” (Through).

ing on the set level LV1 to LV5.

∗ If subwoofer function is set “ON”, “LOW PASS FIL-

● OFF:

TER” can be selected.

 

No dimmer operation is performed.

4.Press the [T] button to return to the previous mode.

Adjusting the display contrast

You can adjust the display contrast to match the angle of installation of the unit.

∗The factory default setting is “8”. (Adjustment level: 1 to 18)

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button to select “ÅCONTRAST Δ.

3.Turn the [ROTARY] knob clockwise or coun- terclockwise to adjust the contrast.

4.Press the [T] button to return to the previous mode.

Anti-theft indicator

The red Anti-theft indicator is a function for preventing theft. When the DCP is removed from the unit, this indicator blinks.

∗The factory default setting is “OFF”.

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button and select “ÅBLINK LEDΔ.

3.Turn the [ROTARY] knob clockwise to set this function “ON” or turn it counterclockwise to switch this function “OFF”.

4.Press the [T] button to return to the previous mode.

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button and select “ÅSUB-W LPFΔ.

3.Turn the [ROTARY] knob clockwise or coun- terclockwise to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order:

THRGH ➜ 50Hz ➜ 80Hz ➜ 120Hz

4.Press the [T] button to return to the previous mode.

Setting the external amplifier

∗The factory default setting is “OFF”.

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button and select “ÅAMP-CANCLΔ.

3.Turn the [ROTARY] knob clockwise or coun- terclockwise and select “ON” or “OFF”.

●ON:

Use with connected AMP.

●OFF:

Use with inside AMP.

4.Press the [T] button to return to the previous mode.

DXZ746MP 23