English

10. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.

Take the measures described below to eliminate the problem.

 

Error Display

Cause

Measure

 

 

 

 

CD/MP3/WMA

ERROR 2

A CD is caught inside the CD deck and is

This is a failure of CD deck’s mechanism and

ERROR 6

A CD is loaded upside-down inside the CD

Eject the disc then reload it properly.

 

 

not ejected.

consult your store of purchase.

 

ERROR 3

A CD cannot be played due to scratches,

Replace with a non-scratched,

 

 

etc.

non-warped-disc.

 

 

 

 

 

 

deck and does not play.

 

 

 

 

 

 

ERROR 2

A CD inside the CD changer is not loaded.

This is a failure of CD changer’s mechanism

changer

 

 

and consult your store of purchase.

 

 

 

ERROR 3

played due to scratches, etc.

disc.

 

A CD inside the CD changer cannot be

Replace with a non-scratched, non-warped

CD

 

 

 

ERROR 6

A CD inside the CD changer cannot be

Eject the disc then reload it properly.

 

 

 

played because it is loaded upside-down.

 

 

 

 

 

 

ERROR 2

A DISC inside the DVD changer cannot be

This is a failure of DVD mechanism and con-

 

 

played.

sult your store of purchase.

 

 

 

 

changer

ERROR 3

A DISC cannot be played due to scratches,

Retry or replace with a non-scratched, non-

 

etc.

warped-disc.

 

 

 

 

 

 

 

ERROR 6

A DISC inside the DVD changer cannot be

Eject the disc then reload it properly

DVD

 

played because it is loaded upside-down.

 

 

 

 

ERROR P

Parental level error

Set the correct Parental level.

 

 

 

 

 

 

ERROR R

Region code error

Eject the disc and replace correct region

 

 

 

code disc.

 

 

 

 

 

AMP GUARD

The speaker protection circuit is operating.

1. Turn down sound volume. Function can

 

 

During this operation, if any volume

also be restored by turning the power off

General

 

operation is performed, the display shows

and on again.

 

“AMP GUARD”.

(Speaker volume is reduced automatically

 

 

 

 

 

when the speaker protection circuit oper-

 

 

 

ates).

 

 

 

2. If the sound is muted again, consult our

 

 

 

service department.

 

 

 

 

If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase.

34 DXZ746MP