English

7. OPERATIONS

Basic Operations

Note:Be sure to read this chapter referring to the front diagrams of

chapter “3. CONTROLS” on page 5 (unfold).

CAUTION

Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.

Adjusting the volume

1.Press the front part of the [ROTARY] knob. The knob will pop up.

2.Turning the [ROTARY] knob clockwise in- creases the volume; turning it counterclock- wise decreases the volume.

∗The volume level is from 0 (minimum) to 33 (maxi- mum).

Turning on/off the power

Note:

•Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery.

1.Press the [FNC] button.

2.The illumination and display on the unit light up. The unit automatically remembers its last operation mode and will automatically switch to display that mode.

3.Press and hold the [FNC] button for 1 sec- ond or longer to turn off the power for the unit.

Note:

•System check

The first time this unit is turned on after the wire connections are completed, it must be checked what equipment is connected. When the power is turned on, “SYSTEM CHCK” and “Push POWER” appear in the display alternately, so press the [FNC] button. The system check starts within the unit. When the system check is complete, press the [FNC] button again.

Selecting a mode

1.Press the [FNC] button to change the opera- tion mode.

2.Each time you press the [FNC] button, the operation mode changes in the following or- der:

Radio mode ➜ CD/MP3/WMA mode ➜ CD changer mode ➜ DVD changer mode ➜ TV mode ➜ AUX mode ➜ Radio mode...

∗External equipment not connected with CeNET is not displayed.

Switching the display

Press the [D] button to select the desired display.

Each time you press the [D] button, the display switches in the following order:

Main display ➜ Clock display ➜ Main display

∗Once selected, the preferred display becomes the display default. When a function adjust- ment such as volume is made, the screen will momentarily switch to that function’s display, then revert back to the preferred display sev- eral seconds after the adjustment.

∗When you have entered a title in a CD, it ap- pears in the main display. If you have not en- tered a title, “NO-TITLE” appears in the title display instead. For information on how to en- ter a title, refer to the subsection “Entering titles” in section “Operations Common to Each Mode”.

Setting the Anti Distortion Filter

The adopted “Liveliness Enhancement Filter” and “Sound Tone Compensation” functions allow well-modulated realistic playback without affecting the characteristics of the original sound tone.

This unit is provided with 3 types of sound tone effects stored in memory. Select the one you prefer.

∗The factory default setting is “ADF OFF”.

Each time you press the [ADF] button, the tone effect changes in the following order:

“ADF-1”➜ “ADF-2”➜ “ADF-3”➜
“ADF OFF” ...

•ADF-1 : suitable for the genuine speakers

•ADF-2 : suitable for separate speakers

•ADF-3 : suitable for coaxial speakers

•ADF OFF : no sound effect

12 DXZ746MP