English
Operations Common to Each Mode
AUX function | Note: | |
This system has an external input jack so you | • You cannot set the clock when it is displayed with | |
only the ignition on. If you drain or remove the | ||
can listen to sounds and music from external | ||
car’s battery or take out this unit, the clock is reset. | ||
devices connected to this unit. | ||
While setting the clock, if another button or opera- | ||
| ||
| tion is selected, the clock set mode is canceled. |
Selecting AUX IN sensitivity
Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume.
∗The factory default setting is “MID”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “ÅAUX SENS Δ.
3.Turn the [ROTARY] knob clockwise or coun- terclockwise as needed and select from “HIGH”, “MID” or “LOW”.
4.Press the [T] button to return to the previous mode.
Triggered audio mute for cellular telepones
This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car.
∗This function is not compatible with all cellular telepones Contact your local authorized Clarion dealer for information on proper installation and compatibility.
Setting the clock
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select
“ÅCLOCKÎ PUSH ENT”.
3.Press the [
] button.
4.Press the [a] or [d] button to select the hour or the minute.
5.Turn the [ROTARY] knob clockwise or coun- terclockwise to set the correct time.
∗ The clock is displayed in
6.Press the [
] button to store the time into memory.
7.Press the [T] button to return to the previous mode.
24 DXZ746MP
Setting the button illumination
Press the [COLOR] button to select a color type. Each time you press the [COLOR] button, the type changes in the following orders:
COLOR SCAN ➜ Indigo Blue ➜ Surf Blue ➜ Silky White ➜ Aqua Green ➜ Fresh Green ➜ Leaf Green ➜ Warm Amber ➜ Passion Red ➜ Vivid Pink ➜ Pale Pink ➜ Dark Violet ➜ Pure Purple ➜ USER COLOR 1 ➜ USER COLOR 2 ➜ USER COLOR 3 ➜ COLOR SCAN ...
●Setting COLOR SCAN mode
As selecting “COLOR SCAN”, the color automatically changes.
∗The factory default setting is “COLOR SCAN”.
∗After 3 seconds the color changes to the other.
● Setting USER mode
The factory default setting is “RÎ8 GÎ8 BÎ8” (R:red, G:green, B:blue).
As selecting “USER COLOR 1, 2, 3”, press and hold the [COLOR] button for 1 second or longer “RÎ8 GÎ8 BÎ8” appears in the display.
1.Press the [a] or [d] button to move the cursor.
2.Turn the [ROTARY] knob to select from 0 to 8.
3.Press and hold the [
] button for 2 sec- onds or longer to store the color in memory and cancel setting mode.
COLOR | R | G | B |
Indigo Blue | 0 | 1 | 8 |
Surf Blue | 0 | 4 | 8 |
Silky White | 6 | 8 | 8 |
Aqua Green | 0 | 8 | 2 |
Fresh Green | 0 | 8 | 0 |
Leaf Green | 4 | 8 | 0 |
Warm Amber | 8 | 3 | 0 |
Passion Red | 8 | 0 | 0 |
Vivid Pink | 8 | 0 | 3 |
Pale Pink | 8 | 1 | 3 |
Dark Violet | 3 | 0 | 8 |
Pure Purple | 8 | 0 | 8 |
USER COLOR 1 | 8 | 8 | 8 |
USER COLOR 2 | 8 | 8 | 8 |
USER COLOR 3 | 8 | 8 | 8 |
|
|
|
|