Clarion EQS560 manual Wiring Precautions

4.If the unit should become wet, turn off all power and ask your authorized Clarion dealer to clean or service the unit.

WIRING PRECAUTIONS

Read all wiring precautions. If you are not sure of the connections, contact your authorized Clarion dealer.

1.This unit operates on an automotive 12V negative ground power source and requires additional mobile audio components for proper operation.

2.Disconnect the negative (-) lead of the battery before making any power connections.

3.A good chassis ground connection is critical to the performance of your Clarion equalizer. Use the shortest ground wire possible and securely connect to the car chassis along with the source unit ground to minimize resistance and avoid noise problems.

4.Extra cable can cause signal loss and act as an “antenna” for noise. Use only high-quality RCA cables that are no longer than necessary to make a direct connection with the source unit and amplifiers.

5.If you are using a source unit, without a remote turn-on lead, the EQS560 can be turned on with a switched accessory lead. You can find this accessory power source in the factory harness at the back of the radio. It is the lead that turns on and off with the key.

5