4.Adjust the auxiliary input gain controls, located on the top panel of the EQS560, so that the volume of the auxiliary source matches the volume of the main source.
TROUBLESHOOTING
Problem
Unit does not work; no lights.
Solution
•Power wires are not connected. Check battery and ground wiring at unit; check battery connections.
Problem
Sound is distorted.
Solution
•Source unit volume is set too high. Reduce source unit volume.
•EQ controls are set too high. Turn EQ controls to the center position and listen for distortion again. If problem still occurs, see your authorized Clarion dealer.
•Speakers may be damaged. Consult your authorized Clarion dealer.
Problem
No sound from unit.
Solution
•Wrong input is selcted. Press Aux Switch so that main inputs are on.
•No
PRODUCT SPECS
Graphic CenterFrequencies: | SUB 45Hz, LOW100Hz, MID 700Hz, |
| |
Boost/Cut: | 12dB |
S/N Ratio: | 105dB |
Frequency Response: | 10Hz |
Maximum Output Voltage: | 7V RMS |
THD: | 0.005 |
Input Sensitivity: | 50mV– 3V RMS |
Head Room: | 20dB |
Input Impedance: | 10K Ohms |
Output Impedance: | 50K Ohms |
Stereo Separation: | 82dB/1Khz |
Operating Voltage: | 11 – 15VNegative Ground |
Size: | 24mm H x 178mm W x 110mm D |
7