5. DCP
The control panel can be detached to prevent theft. When detaching the control panel, store it in the included DCP case to prevent scratches.
We recommend taking the control panel with you when leaving the car.
Storing the DCP in the DCP Case
Hold the DCP, in the orientation as shown in the figure below, and put it into the supplied DCP case. (Ensure the DCP is in the correct orienta- tion.)
Removing the DCP
1.Hold down POWER button 3 for 1 second or longer to turn off the power.
2.Press the DCP Release button 1.
∗The DCP is unlocked
3. Remove the DCP.
Attaching the DCP
Insert the DCP into the right side of the source unit and press the left side to lock it.
Do not insert the DCP from the left side. Do- ing so may damage it.
•The DCP can easily be damaged by shocks. After removing it, place it in a protective case and be careful not to drop it or subject it to strong shocks.
•When the Release button is pressed and the DCP is unlocked, the car’s vibrations may cause it to fall. To prevent damage to the DCP, always store it in its case after detach- ing it.
•The rear connector connecting the main unit and the DCP is an extremely important part. Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.
DCP Rear Panel | Source Unit Front |
DCP connector
Source unit connector
Note:
•If the DCP is dirty, wipe off the dirt with a soft, dry clothonly.
RMX465D 7