Clarion RMX465D MD Operations, Selecting a track, Random play, Setting the clock, Top function

MD Operations

Selecting a track Random play

●Track-up

1.Press the right side of SRCH button # to move ahead to the beginning of the next track.

2.Each time you press the right side of SRCH button #, the track advances ahead to the beginning of the next track.

●Track-down

1.Press the left side of SRCH button # to move back to the beginning of the current track.

2.Press the left side of SRCH button # twice to move to the beginning of the previous track.

The random play selects and plays individual tracks on a disc in no particular order. This function continues automatically until it is canceled.

1.Press RDM button 7. “RDM” lights in the display, an individual track is selected randomly and play begins.

2.To cancel the random play, press RDM button

7 again. “RDM” goes off and normal play resumes.

Setting the clock

Fast-forward/fast-backward

●Fast-forward

Press and hold the right side of SRCH button # for 1 second or longer.

●Fast-backward

Press and hold the left side of SRCH button # for 1 second or longer.

Top function

The top function resets the MD player to the first track of the disc. Press TOP button @ to play the first track (track No. 1) on the disc.

Scan play

The scan play locates and plays the first 10 seconds of each track on a disc automatically.This function continues on the disc until it is canceled.

∗The scan play is useful when you want to select a desired track.

1.Press SCN button 9 to start track scanning. “SCN” lights in the display.

2.To cancel the scan play, press SCN button 9 again. “SCN” goes off from the display and the current track continues to play.

Repeat play

The repeat play continuously plays the current track. This function continues automatically until it is canceled.

1.Press RPT button 8. “RPT” lights in the display and the current track is repeated.

2.To cancel the repeat play, press RPT button 8 again. “RPT” goes off from the display and normal play resumes.

1.Press the DISP button 5to toggle the display to the clock mode.

2.Press and hold the DISP button 5 for 1 second or longer.

3.Select SRCH left or right to adjust the time using the α -selector #.

●Adjusting minutes

Each time you use the SRCH right button #, the minutes increment up by one digit (0 to 59).

●Adjusting hours

Each time you use the SRCH right button #, the hours increment up by one digit (1 AM to 12 PM). Repeat press left and hold the α -selector # to increment the hours as they count up from AM to PM, stopping on the correct hour.

∗The clock only displays time in a 12-hour format. There is no way to toggle the clock to a 24-hour format.

4.Press the DISP button 5 to set the clock into memory. This also resets the seconds counter to zero.

Note:

•The clock can only be set by turning power on to the unit and switching to the clock display mode. You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car’s battery, the clock must be reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled.

14 RMX465D