Clarion RPNP Plug and Play Receiver Audio Level Options, Antenna Aiming Home Installation, Sirpnp

SIRPNP 23

Changing the lock code

1.Press MENU.

2.Rotate the Encoder knob to highlight Lock Options.

3.Press the Encoder knob to select Lock Options.

4.Rotate the knob to highlight Edit Code.

5.Press the knob again.

6.Enter the default code “0000” (or the lock code you previously defined).

The New Code prompt appears.

7.Enter the new four-digit code using the keypad buttons.

The unit prompts you to confirm the code.

8.Enter the new four-digit code again. You have changed the lock code.

Audio Level Options

This option adjusts the audio level indication and audio gain (the increased level of a sound that results from amplifying the input signal).

When you select this option, a 10-segment horizontal bar graph with a minus (-) at the left end and a plus (+) at the right end indicates the current setting.

Rotate the Encoder knob to adjust the bar graph and press the Encoder knob when finished.

Antenna Aiming (Home Installation)

To receive a good signal requires a direct line of sight between you and the satellite. If your reception is poor, moving the antenna may help. This option confirms that the antenna is in the best position to receive the satellite signal.

1.Press MENU.