Installing the monitor

Flush mounting in the headrest

You may use the included bezel to mount the monitor.

1.Ensure that you will have sufficient clearance for the monitor and its rear-located wiring harness.

2.Cut the opening.

3.Route the pigtail cable end of the wiring harness into the opening from the rear out the front.

4.Insert the bezel and route the wiring harness through the opening in the rear.

5.Firmly attach the bezel to the mounting surface and/or to the interior of the mounting surface.

Mounting tabs

Mounting screw holes

Wire harness opening

6.Connect the wiring harness to the monitor, and tuck the excess wiring harness length carefully out of the way behind the bezel.

English

Press edges to

 

fit monitor into

Spring clips

bezel, do not

lock the

press monitor

monitor in

screen

place

 

Bezel

Monitor

13