English
Display mode setting
To choose the proper display mode for the different video sources, please refer to display mode setting below.
1.Press MENU several times until you reach the DISPLAY MODE option.
2.Press ▼ (down key) or ▲ (up key) to select the display mode for: NORMAL, FULL
WIDE, and WIDE.
3.WIDE may stretch the image to fill the entire screen, NORMAL displays the image at its true aspect ratio (4:3), FULL WIDE stretches the image horizontally to fit the screen for aspect ratio of 16:9.
Note :
•When using a DVD player as the source, make sure that the unit’s output mode is set to “FULL WIDE” or “16:9”. This ensures that the DVD player will generate a video signal, which can take advantage of the monitor’s aspect ratio.
•When using a source that generates a “normal”, 4:3 image signal, such as a video game or video cassette player, the FULL WIDE mode stretches the image to fit the screen. Some minor image distortion may be visible.
•Video format are automatically select between PAL or NTSC depending on the video format.
Adjusting the picture
For optimum picture quality, the tint, color, brightness, and contrast can be adjusted independently.
1.Press the MENU key to display the picture adjustment menus. The monitor displays the adjustment menus.
2.Press the MENU key again until you reach the option you wish to adjust. The monitor displays the adjustment bar as below.
TINT adjusts the tone of color. (Only for NTSC) COLOR adjusts the color saturation.
BRIGHT adjusts the monitor’s brightness.
CONTRAST adjusts the differences between light and dark areas.
3.Press the ▲ (up key) controls button to increase the adjustment.
Press the ▼ (down key) controls button to decrease the adjustment.
Each setting has 30 steps of adjustment range and is preset to 15 at the factory. Once you’ve adjusted the picture, wait a moment and the adjustment menus disappear.