5.TROUBLESHOOTING

The system does not work

A fuse may be blown. Replace the external fuse with a fuse of the same amperage. The power wires may not be connected. Check the wiring connections and reset.

No picture

Press SOURCE to make sure the proper input is selected.

If there is still no picture, press MENU. If the menu appears, check the source unit and video connections. If no menu appears, check all fuses and power connections to the monitor and the associated equipment.

The noise comes out

If portable audio-visual devices are connected to this monitor in the state where it connected with the vehicle’s power supply for charge etc., a noise may occur rarely.

In this case, please use portable audio-visual devices without connecting with a vehicles power supply. Please use it with the internal battery of devices etc.

Note:

The monitor has an operating temperature range of –10°C to +70°C (+15°F ~ +158°F). If the temperature is outside this operating range, the unit may not turn on, or the screen may be slow to react to image changes. The monitor will function normally once it returns to its proper operating range.

With a DVD player and widescreen DVD disc, there are black bars above and below the picture

Change the TV display mode to “FULL WIDE” in the DVD player’s Setup menu.

After changing this setting, if there are still black bars, set the Display mode to “FULL WIDE” by push MENU key as mentioned before.

The screen is dark

The brightness is set too low. Press MENU and adjust the BRIGHT option.

The interior of the vehicle is too hot or too cold. The monitor’s operating temperature is –10°C to +70°C (+15°F ~ +158°F).

English

17