●Connecting the parking brake cord
Connect the cord to parking brake lamp ground in the meter panel.
Note:
•Connecting the parking brake cord to lamp ground allows you to watch TV/VTR/DVD video/video CD when the parking brake is engaged.
•When the parking brake cord is not connected, the monitor will not turn on.
•If “AUDIO ONLY” appears on the screen just after turning on the ACC power of the car, release the parking brake while confirming safety, and then engage the parking brake again.
English INSTALLATION MANUAL
Parking brake lamp
+ cord to battery
Parking brake
Parking brake signal cord
Parking brake cord
●How to attach the electro-tap
1.Place the Parking brake cord at the stopper, and fold it back in the direction of the arrow.
2.Pass the Parking brake signal cord through, and fold it back in the direction of the arrow.
Parking brake
signal cordParking brake signal cord
Stopper
Parking brake cord
Connecting the Accessories
●Connection to the external amplifier
The external amplifier can be connected unless the 5.1 ch Surround Decoder is connected. For detailed information, refer to the instruction manual of the 5.1 ch Surround Decoder.
●Connection to the CCD camera for vehicle
The CCD camera for vehicle can be connected to CCD terminal on the main unit. For detailed information, refer to the instruction sheet or manual for the CCD camera.
Note:
•Be sure to connect the Reverse Gear terminal to the vehicle’s relevant terminal.
•Connect the CCD camera to the RCA Pin (yellow); if not, the screen turns black while the gearshift lever is in the reverse gear position.
•A power supply box (sold separately) is required for connection of the main unit and the CCD camera.
•The power supply box for the camera CAA147 cannot be used. Please use the CAA188 instead.
●If the specified cord of the cellular phone is connected to the phone interrupt cord of the main unit, the audio mute is available when the cellular phone is used.
●Satellite Radio Receiver
When a Satellite Radio Receiver is to be connected, use the CeNET connector. For detailed information,refer to the instruction manual of the Satellite Radio Receiver.
●TV Tuner
When the TV tuner is to be connected, connect the CeNET connector and RCA PIN (yellow). For detailed information, refer to the instruction manual of the TV tuner.
●DVD Changer
To connect the TV tuner and the DVD changer simultaneously, use a commercial video selector purchasing separately.
●Navigation System (NAX970HD)
When the Navigation System is to be connected, connect the CeNET connector and the RGB terminal. For detailed information, refer to the instruction manual of the Navigation System.
VRX775VD 77
