Clarion VRX775VD owner manual DSF mode, EQ mode

5.1 ch Surround Decoder Operations

English Owner’s manual

DSF mode

DSF effect ON/OFF

• The factory default setting is “OFF”.

1.Press the [ADJ] button, and touch the [AUDIO] key.

2.Touch the []] key of the STATUS item.

3.Touch the [ON] or [OFF] key of the DSF item to turn the function ON or OFF.

4.Touch the [Back] key to return to the previous screen.

Note:

•If the DSF effect is set to OFF, the adjustment made in “DSF” is not reflected in the music source.

Selecting the DSF type

1.Press the [ADJ] button, and touch the [AUDIO] key.

2.Touch the []] key of the DSF item.

3.Touch the key for the desirable type to select.

4.Touch the [Back] key to return to the previous screen.

P.EQ mode

P.EQ effect ON/OFF

• The factory default setting is “OFF”.

1.Press the [ADJ] button, and touch the [AUDIO] key.

2.Touch the []] key of the STATUS item.

3.Touch the [ON] or [OFF] key of the P.EQ item to turn the function ON or OFF.

4.Touch the [Back] key to return to the previous screen.

Note:

•If the P.EQ effect is set to OFF, the adjustment made in “P.EQ” is not reflected in the music source.

Setting and storing P.EQ Properties

1.Press the [ADJ] button, and touch the [AUDIO] key.

2.Touch the []] key of the P.EQ item to display the submenu.

3.Touch the key for the desirable type to select. The P.EQ adjustment contents are as follows: [SIGNAL]:

This function selects “MUSIC” or “P. NOISE”.

• The factory default setting is “P.NOISE”.

[SPEAKER SELECT]:

This function selects “FRONT”, “CENTER” or “SURROUND”.

• The factory default setting is “FRONT”.

*This setting is disabled when both the CENTER SP and SURROUND SP items of the SPEAKER SEL setting are set to “OFF”.

*This function is not available for speakers whose SPEAKER SEL setting is set to “OFF”.

[BAND]:

Select the channel to be compensated (“BAND1”, “BAND2”, “BAND3”).

•The factory default setting is “BAND1”. [FREQUENCY]:

Select the center frequency that you want to compensate from the range of 18 Hz to

20 kHz. (1/3 octave step, 31 points)

•The factory default setting is “1 kHz”.

[Q]:

Set the sharpness of the Q-curve to one of the parameters: 1, 3, 5, 7 and 20.

•The factory default setting is “1”. [GAIN]:

Adjust the gain (output level) in the range of –6 dB to +6 dB. (1 dB step, 13 points)

•The factory default setting is “0”.

4.Touch the [Back] key to return to the previous screen.

64 VRX775VD