DVD Video Player Operations
English Owner’s manual
The relationship between DVD video category codes and parental level are shown in the table below. Use this table when setting the parental level.
LEVEL7 | |
| (NO ONE 17 AND UNDER ADMITTED) |
|
|
LEVEL6 | R |
| (RESTRICTED) |
|
|
LEVEL4 | |
| (PARENTS STRONGLY CAUTIONED) |
LEVEL3 | PG |
| (PARENTAL GUIDANCE SUGGESTED) |
|
|
LEVEL1 | G |
| (GENERAL AUDIENCES) |
|
|
•The contents that the parental level re- stricts varies with the country code.
Setting up the output mode for audio signals
∗This function is not displayed on the menu when the Multiple Channel Processor (DVH920, sold separately) is CeNET connected.
1.Following the steps 1 to 3 in “Selecting the DVD SETUP menu”, touch the [AUDIO OUTPUT] key.
2.Touch the [ANALOG], [DIGITAL RAW] or
[DIGITAL PCM] key to select a desired mode to set it.
∗ The factory default setting is “ANALOG”.
●ANALOG:
Outputs analog audio signals through RCA con- nection.
●DIGITAL RAW:
Outputs 5.1ch digital signals through optical connection. PCM audio signals are output downsampling the signal from 96 kHz to the lower sampling rate, 48 kHz.
Basic Operations
Loading a disc
Insert a disc into the centre of the insertion slot with the label side facing up. The disc plays au- tomatically after loading.
Notes:
•Never insert foreign objects into the disc insertion slot.
•If the disc is not inserted easily, there may be an- other disc in the mechanism or the unit may re- quire service.
Loading 8 cm discs
∗No adapter is required to play an 8 cm disc.
∗Insert the 8 cm disc into the centre of the inser- tion slot.
CAUTION
With the screen open, a driver may not see the disc insertion slot. For your safety, insert a disc with the screen closed.
Watching/Listening to a disc already inserted
1.Press the [FUNC] button to select the DVD mode. Play starts automatically. If no disc is loaded in the unit, “NO DISC” appears in the display.
WARNING
•Videos may be played back with particu- larly loud sound. Increase the volume gradually from the minimum after the video images are displayed.
•For your safety, the driver should not watch the video or operate the controls while driving. Please note that watching and operating the video while driving are prohibited by law in some countries.
●DIGITAL PCM:
Outputs 2ch digital signals through optical con- nection. PCM audio signals are output downsampling the signal from 96 kHz to the lower sampling rate, 48 kHz.
3.Touch the [RTN] key to return previous mode.
Notes:
•For your safety, the VRX925VD has a safety func- tion which turns off the picture when the car is moving, so only the audio can be heard. The pic- ture can only be watched when the car is stopped and the parking break is applied.
Pausing play
1.Press the [s] button to pause play. “PAUSE” appears in the display.
2.To resume disc play, press the [s] button again.
30 VRX925VD
