Clarion VRX925VD owner manual Multiple Channel Processor Operations, MCP control function

Multiple Channel Processor Operations

English Owner’s manual

MCP control function

This function is available when a Multiple Channel Processor (DVH920) is connected.

When the Multiple Channel Processor (DVH920, sold separately) is CeNET connected, the Multiple Channel Controller (DVC920, sold separately) cannot be used.

This section describes operation procedures only.

For other details, refer to the owner’s manual supplied with the Multiple Channel Processor.

∗For details on functions of each mode, refer to the owner’s manual supplied with the DVH920.

1.Press the [ADJ] button to show the ADJUST MODE menu.

2.Touch the [SOUND] key.

SOUND

3.Touch the required keys to make the desired setting.

●SPEAKER SEL (speaker sel)

This function determines center speaker, surround speaker and sub woofer connection.

3-1 Touch the [SPEAKER SEL] key to show the submenu.

3-2 Touch the [CENTER SP], [SURROUND SP] or [SUB WOOFER] key and the “ON” or “OFF” key to turn speakers on or off depending on what speakers are connected.

•The default value is “ON”.

•The phase of the “SUB WOOFER” is reversed in the ON- setting. The default value is “ON+”.

●PL II Control

∗This function is available only when the MUSIC MODE is selected for Dolby PL II. For setup details, see “Selecting the Dolby PL II (Dolby Pro Logic II) type.”

3-1. Touch the [PL II CONTROL] key to show the submenu.

3-2. Touch the [PANORAMA], [DIMENSION] or [CENTER WIDTH] key to select respective item.

[PANORAMA]:

Touch the [ON] or [OFF] key. “OFF” is the default value.

[DIMENSION]:

Touch the [w] or [z] key to make adjustments between 0 and 6. The default value is “3”.

[CENTER WIDTH]:

Touch the [w] or [z] key to make adjustments between 0 and 7. The default value is “3”.

●Filter

This function is used to select filter frequencies that suit the speakers that are used.

∗This function is not available for speakers whose SPEAKER SEL setting is set to OFF.

3-1. Touch the [FILTER] key to show the submenu.

3-2. Touch the [FRONT HPF], [CENTER HPF], [SURROUND HPF] or [SUB WOOFER LPF] key to set respective item.

3-3. Touch [w] or [z] key to make settings.

[FRONT HPF]:

This function can be set to the following four settings: 50 Hz, 80 Hz, 120 Hz or THROUGH. “THROUGH” is the default value.

[CENTER HPF]:

This function can be set to the following three settings: 50 Hz, 80 Hz and 120 Hz. “120 Hz” is the default value.

[SURROUND HPF]:

This function can be set to the following four settings: 50 Hz, 80 Hz, 120 Hz or THROUGH. “THROUGH” is the default value.

[SUB WOOFER LPF]:

This function can be set to the following three settings: 50 Hz, 80 Hz and 120 Hz. “120 Hz” is the default value.

58 VRX925VD