English
5.1 ch Surround Decoder Operations
DSF mode | ●SIGNAL |
| ∗ The factory default setting is “P.NOISE”. |
|
Owner’s manual
DSF effect ON/OFF
∗The factory default setting is “OFF”. 1. Press the
2. Touch the [STATUS] key.
3. Touch the [DSF] key to select “on” and “off”.
4.Each time the [ON/OFF] key is touched, the on and off statuses are switched alternately.
5.After the setting, press the
Note:
•If the DSF effect is set to OFF, the adjustment made in “DSF” is not reflected in the music source.
This function selects [P. NOISE] or [MUSIC].
●SPEAKER SELECT
∗The factory default setting is “FRONT”.
This function selects [FRONT], [CENTER] or [SURROUND].
●“BAND”
∗The factory default setting is “BAND1”.
Select the channel to be compensated (BAND1, BAND2, BAND3).
●“FREQUENCY”
∗The factory default setting is “1 kHz”.
Select the center frequency that you want to compensate from the range of 20 Hz to 20 kHz. (1/3 octave step, 31 points)
Selecting the DSF type
1.Press the
2.Touch the key for the desirable type to select it.
3.When the setting is finished, touch the [RTN] key or press the
P.EQ mode
P.EQ effect ON/OFF
∗The factory default setting is “OFF”. 1. Press the
●“Q”
∗The factory default setting is “1”.
Set the sharpness of the
●“GAIN”
∗The factory default setting is “0”.
Adjust the gain (output level) in the range of - 12 dB to +12 dB. (1 dB step, 25 points)
4.After making adjustments to a desired pat- tern by repeating the operations of item3, touch the [RNT] key or press the
2.Touch the [STATUS] key.
3.Touch the [P.EQ] key to select “on” and “off”.
4.Each time the [ON/OFF] key is touched, the on and off statuses are switched alternately.
5.After the setting, press the
Note:
•If the P.EQ effect is set to OFF, the adjustment made in “P.EQ” is not reflected in the music source.
Selecting the Dolby PLII (Dolby Pro Logic II) type
1.Press the
2.Touch the key for the desirable type to select it.
3.When the setting is finished, touch the [RTN] key or press the
∗ The factory default is “off”.
Setting and storing P.EQ Properties
1.Press the
2.Touch the [P.EQ] key to show the P.EQ ad- justing display.
3.Touch the key for the desirable type to select it.
The P.EQ adjustment contents are as fol- lows:
60 VRX935VD